Cisco 3750 - Catalyst EMI Switch Ficha de dados - Página 11

Procurar online ou descarregar pdf Ficha de dados para Interruptor Cisco 3750 - Catalyst EMI Switch. Cisco 3750 - Catalyst EMI Switch 18 páginas. Catalyst 3750 series switches
Também para Cisco 3750 - Catalyst EMI Switch: Manuais de instalação (47 páginas), Perguntas frequentes (10 páginas), Boletim do produto (5 páginas), Boletim de apoio ao produto (6 páginas), Visão geral do produto (25 páginas), Descrição (1 páginas), Ficha de dados (23 páginas), Boletim de apoio ao produto (6 páginas), Manual de iniciação (27 páginas), Ficha de dados (23 páginas), Manual de iniciação (33 páginas)

Cisco 3750 - Catalyst EMI Switch Ficha de dados
Table 2
Hardware
Description
Specification
Connectors and
• 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP)
cabling
• 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
• 1000BASE-T ports: RJ-45, 2-pair Category 5 UTP cabling
• 1000BASE-T SFP-based ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
• 1000BASE-SX, -LX/LH, -ZX, and CWDM* SFP-based ports: LC fiber connectors
• Cisco StackWise stacking ports: copper-based Cisco StackWise cabling
• Management console port: RJ-45-to-DB9 cable for PC connections
Power connectors
Customers can provide power to a switch by using either the internal power supply or the
Cisco RPS 675. The connectors are located at the back of the switch.
Internal Power Supply Connector
• The internal power supply is an auto-ranging unit.
• The internal power supply supports input voltages between 100 and 240 volts alternating
• Use the supplied alternating-current (AC) power cord to connect the AC power connector to
Cisco RPS Connector
• The connector offers connection for an optional Cisco RPS 675 that uses AC input and
• The connector offers a 675-watt (W) RPS that supports up to 6 external network devices and
• The connector automatically senses when the internal power supply of a connected device
• Only the Cisco RPS 675 (model PWR675-AC-RPS-N1=) should be attached to the
Indicators
• Per-port status LEDs: link integrity, disabled, activity, speed, and full-duplex indications
• System-status LEDs: system, RPS, and bandwidth-utilization indications
Dimensions
• 2.59 x 17.5 x 11.6 inches (in.) (6.59 x 44.5 x 29.5 centimeters [cm]) (Cisco Catalyst
• 1.73 x 17.5 x 12.83 in (4.39 x 44.5 x 32.6 cm) (Cisco Catalyst 3750G-24T)
• 1.73 x 17.5 x 12.83 (4.39 x 44.5 x 32.6 cm) (Cisco Catalyst 3750G-12S)
• 1.73 x 17.5 x 11.83 in. (4.39 x 44.5 x 30.1 cm) (Cisco Catalyst 3750-48TS)
• 1.73 x 17.5 x 11.83 in. (4.39 x 44.5 x 30.1 cm) (Cisco Catalyst 3750-24TS)
Weight (H x W x D)
• 12.5 pounds (lb) (5.68 kilograms [kg]) (Cisco Catalyst 3750G-24TS)
• 10.0 lb (4.55 kg) (Cisco Catalyst 3750G-24T and Catalyst 3750G-12S)
• 9.1 lb (4.1 kg) (Cisco Catalyst 3750-48TS)
• 8.0 lb (3.6 kg) (Cisco Catalyst 3750-24TS)
Environmental
• Operating temperature: 32˚ to 113˚ F (0˚ to 45˚ C)
ranges
• Storage temperature: –13˚ to 158˚ F (–25˚ to 70˚ C)
• Operating relative humidity: 10 to 85% (noncondensing)
• Operating altitude: Up to 10,000 feet (ft) (3049 meters [m])
• Storage altitude: Up to 15,000 ft (4573 m)
All contents are Copyright © 1992–2003 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
cabling
(single-mode, or multimode fiber)
current (VAC).
an AC power outlet.
supplies direct-current (DC) output to the switch.
provides power to 1 failed device at a time.
fails and provides power to the failed device, preventing loss of network traffic.
redundant-power-supply receptacle.
3750G-24TS)
Cisco Systems, Inc.
Page 11 of 18