Cisco 3750 - Catalyst EMI Switch Ficha de dados - Página 10

Procurar online ou descarregar pdf Ficha de dados para Interruptor Cisco 3750 - Catalyst EMI Switch. Cisco 3750 - Catalyst EMI Switch 23 páginas. Catalyst 3750 series switches
Também para Cisco 3750 - Catalyst EMI Switch: Ficha de dados (18 páginas), Manuais de instalação (47 páginas), Perguntas frequentes (10 páginas), Boletim do produto (5 páginas), Boletim de apoio ao produto (6 páginas), Visão geral do produto (25 páginas), Descrição (1 páginas), Boletim de apoio ao produto (6 páginas), Manual de iniciação (27 páginas), Ficha de dados (23 páginas), Manual de iniciação (33 páginas)

Cisco 3750 - Catalyst EMI Switch Ficha de dados
Table 1
Product Features and Benefits (Continued)
Feature
Manageability
Superior Manageability
All contents are Copyright © 1992–2004 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Benefit
• Cisco IOS CLI support provides common user interface and command set with
all Cisco routers and Cisco Catalyst desktop switches.
• Service Assurance Agent support facilitates service-level management
throughout the LAN.
• Switching Database Manager templates for access, routing, and VLAN
deployment scenarios allow the administrator to easily maximize memory
allocation to the desired features based on deployment-specific requirements.
• VLAN trunks can be created from any port, using either standards-based 802.1Q
tagging or the Cisco Inter-Switch Link (ISL) VLAN architecture.
• Up to 1005 VLANs per switch or stack and up to 128 spanning-tree instances
per switch are supported.
• 4000 VLAN IDs are supported.
• Voice VLAN simplifies telephony installations by keeping voice traffic on a
separate VLAN for easier administration and troubleshooting.
• Cisco VLAN Trunking Protocol (VTP) supports dynamic VLANs and dynamic
trunk configuration across all switches.
• Cisco Group Management Protocol (CGMP) server functions enable a switch
to serve as the CGMP router for CGMP client switches. EMI is required.
• IGMP snooping provides fast client joins and leaves of multicast streams and
limits bandwidth-intensive video traffic to only the requestors.
• Remote Switch Port Analyzer (RSPAN) allows administrators to remotely
monitor ports in a Layer 2 switch network from any other switch in the same
network.
• For enhanced traffic management, monitoring, and analysis, the Embedded
Remote Monitoring (RMON) software agent supports 4 RMON groups (history,
statistics, alarms, and events).
• Layer 2 traceroute eases troubleshooting by identifying the physical path that
a packet takes from source to destination.
• All 9 RMON groups are supported through a SPAN port, which permits traffic
monitoring of a single port, a group of ports, or the entire stack from a single
network analyzer or RMON probe.
• Domain Name Services (DNS) provide IP address resolution with user-defined
device names.
• Trivial File Transfer Protocol (TFTP) reduces the cost of administering software
upgrades by downloading from a centralized location.
• Network Timing Protocol (NTP) provides an accurate and consistent timestamp
to all intranet switches.
• Multifunction LEDs per port for port status; half-duplex and full-duplex mode;
and 10BASE-T, 100BASE-TX, and 1000BASE-T indication as well as switch-level
status LEDs for system, redundant-power supply, and bandwidth utilization
provide a comprehensive and convenient visual management system.
• SPAN works across all the ports in a stack.
Cisco Systems, Inc.
Page 10 of 22