Cisco 3750 - Catalyst EMI Switch Ficha de dados - Página 11

Procurar online ou descarregar pdf Ficha de dados para Interruptor Cisco 3750 - Catalyst EMI Switch. Cisco 3750 - Catalyst EMI Switch 23 páginas. Catalyst 3750 series switches
Também para Cisco 3750 - Catalyst EMI Switch: Ficha de dados (18 páginas), Manuais de instalação (47 páginas), Perguntas frequentes (10 páginas), Boletim do produto (5 páginas), Boletim de apoio ao produto (6 páginas), Visão geral do produto (25 páginas), Descrição (1 páginas), Ficha de dados (23 páginas), Boletim de apoio ao produto (6 páginas), Manual de iniciação (27 páginas), Manual de iniciação (33 páginas)

Cisco 3750 - Catalyst EMI Switch Ficha de dados
All contents are Copyright © 1992–2006, 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.

PRODUCT SPECIFICATIONS

Table 2 lists product specifications for the Cisco Catalyst 3750 Series.
Table 2.
Descriptions and Specifications
Description
Specification
Performance
● 32-Gbps switching fabric
● Stack-forwarding rate of 38.7 mpps for 64-byte packets
● Forwarding rate: 6.5 mpps (Cisco Catalyst 3750-24TS, 3750-24FS, and 3750-24PS), 13.1
mpps (Cisco Catalyst 3750-48TS and 3750-48PS), 17.8 mpps (Cisco Catalyst 3750G-12S),
35.7 mpps (Cisco Catalyst 3750G-24T), 38.7 mpps (Cisco Catalyst 3750G-24TS and 3750G-
24WS), 35.7 mpps (Cisco Catalyst 3750G-16TD), 38.7 mpps (Cisco Catalyst 3750G-24TS-
1U), 38.7 mpps (Cisco Catalyst 3750G-24PS), 38.7 mpps (Cisco Catalyst 3750G-48TS), 38.7
mpps (Cisco Catalyst 3750G-48PS)
● 128 MB DRAM and 16 MB Flash memory (Cisco Catalyst 3750G-24TS, 3750G-24WS,
3750G-24T, 3750G-12S, 3750-24TS, 3750-24PS, 3750-48TS, 3750-48PS, and 3750G-
16TD)
● 128 MB DRAM and 32 MB Flash memory (Cisco Catalyst 3750G-24TS-1U, 3750G-24WS,
3750G-24PS, 3750G-48TS, 3750G-48PS, and 3750-24FS)
● Configurable up to 12,000 MAC addresses (Cisco Catalyst 3750G-24TS, 3750G-24WS,
3750G-24T, 3750G-12S, 3750-24TS, 3750-24FS, 3750-24PS, 3750-48TS, 3750-48PS,
3750G-24TS-1U, 3750G-24PS, 3750G-48TS, 3750G-48PS, and 3750G-16TD)
● Configurable up to 20,000 unicast routes (Cisco Catalyst 3750G-12S) and up to 11,000
unicast routes (Catalyst 3750G-24TS, 3750G-24WS, 3750G-24T, 3750-24TS, 3750-24FS,
3750-24PS, 3750-48TS, 3750-48PS, 3750G-24TS-1U, 3750G-24PS, 3750G-48TS, 3750G-
48PS, and 3750G-16TD)
● Configurable up to 1000 IGMP groups and multicast routes (Cisco Catalyst 3750G-24TS,
3750G-24WS, 3750G-24T, 3750G-12S, 3750-24TS, 3750-24FS, 3750-24PS, 3750-48TS,
3750-48PS, 3750G-24TS-1U, 3750G-24PS, 3750G-48TS, 3750G-48PS, and 3750G-16TD)
● Configurable maximum transmission unit (MTU) of up to 9000 bytes, with a maximum
Ethernet frame size of 9018 bytes (jumbo frames) for bridging on Gigabit Ethernet ports, and
up to 1546 bytes for bridging and routing on Fast Ethernet ports
● 10BASE-T ports: RJ-45 connectors, 2-pair Category 3 (Cat-3), 4, or 5 unshielded twisted-pair
Connectors
and Cabling
(UTP) cabling
● 100BASE-TX ports: RJ-45 connectors, 2-pair Cat-5 UTP cabling
● 100BASE-FX ports: MT-RJ connectors, 50/125 or 62.5/125 micron multimode fiber
● 1000BASE-T ports: RJ-45 connectors, 2-pair Cat-5 UTP cabling
● 1000BASE-T SFP-based ports: RJ-45 connectors, 2-pair Cat-5 UTP cabling
● 1000BASE-SX, -LX/LH, -ZX, and CWDM SFP-based ports: LC fiber connectors (single-
mode, or multimode fiber)
● 10GBASE-ER XENPAK-based port (single-mode)
● 10GBASE-LR XENPAK-based port (single-mode)
● Cisco StackWise stacking ports: copper-based Cisco StackWise cabling that is also
compatible with the StackWise Plus technology in the Cisco Catalyst 3750-E Series
Switches.
● Management console port: RJ-45-to-DB9 cable for PC connections
● Customers can provide power to a switch by using either the internal power supply or a
Power Connectors
redundant power system (Cisco RPS 2300 or the Cisco RPS 675). The connectors are
located at the back of the switch.
● Internal power supply connector
● The internal power supply is an autoranging unit.
● The internal power supply supports input voltages between 100 and 240VAC.
● Use the supplied AC power cord to connect the AC power connector to an AC power outlet.
● Cisco RPS Connector
● The connector offers connection for an optional Cisco RPS 2300 or RPS 675 that uses AC
input and supplies DC output to the switch.
● The connector automatically senses when the internal power supply of a connected device
fails and provides power to the failed device, preventing loss of network traffic.
● Only the Cisco RPS 2300 (model PWR-RPS2300) or the Cisco RPS 675 (PWR675-AC-RPS-
N1=) should be attached to the redundant-power-supply receptacle.
Indicators
● Per-port status LEDs: link integrity, disabled, activity, speed, and full-duplex indications
● System-status LEDs: system, RPS, and bandwidth-utilization indications
Data Sheet
Page 11 of 23