Byiba 2415B Instruções - Página 2

Procurar online ou descarregar pdf Instruções para Luz de trabalho Byiba 2415B. Byiba 2415B 2 páginas.

To ensure equipment safety you must carefully follow the instructions below. This leaflet must be kept handy by personnel entrusted with all ordinary and

extraordinary maintenance.

• Before any installation or maintenance operation on the bulb, make sure it is disconnected from power.

• Fit the correct bulbs, according to the type and power indicated on the lamp data label.

• Make sure the lamp technical features are compatible with the use you are going to make of it.

• Should you have any doubt, refer to the dealer or ask an electrician.

• When connecting to the mains, fallow the correct colour code far power cables: (N) blue, (L) brown or black and, only far class I equipment, (T) yellow/green.

• When lamps are to be fitted to the wall directly through their ceramic parts, fasten the fixing screws lightly, to avoid breaking the ceramic.

• To clean the lamp on the outside, use a soft cloth, possibly wet. Do not use solvents or abrasive products. No liquid must get in contact with the lamp interior

parts.

• Do not touch the equipment with dirty hands.

= Class I equipment, must be connected to an earth terminal.

= Double insulated lamp, does not need earthing.

= Electrical equipment in class III, electrical safety guaranteed by low voltage tension, does not require grounding

= Replace immediately the safety glass, if damaged, with the original part.

= Minimum distance to be observed from all lit up objects.

= The lamp uses low pressure bulbs, and needs no protection glass.

= Device with CE marking

= The equipment at the end of its life must be collected separately from other waste

IMPORTANT