Cisco 5509 - Catalyst Chassis Switch Manual de instalação - Página 2
Procurar online ou descarregar pdf Manual de instalação para Interruptor Cisco 5509 - Catalyst Chassis Switch. Cisco 5509 - Catalyst Chassis Switch 34 páginas. Wireless controller
Também para Cisco 5509 - Catalyst Chassis Switch: Manual de instalação rápida (17 páginas)
Imprimir página
Compliance and Safety Information
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case users will be
required to correct the interference at their own expense.
Try to correct the interference by one or more of the following measures:
•
•
•
Safety Information
Safety warnings appear throughout this guide in procedures that may harm you if performed incorrectly.
A warning symbol precedes each warning statement. The warnings below are general warnings that
apply to the entire guide. Translated versions of the safety warnings in this guide are provided in the
Regulatory Compliance and Safety Information for the Cisco 5500 Series Wireless Controller document
that accompanies this guide.
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
Warning
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this device.
Statement 1071
SAVE THESE INSTRUCTIONS
This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
Warning
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection
authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024
Statement 371—Power Cable and AC Adapter
Cisco 5500 Series Wireless Controller Installation Guide
2
Verify that the ambient temperature remains between 32 to 104° F (0 to 40° C), taking into account
the elevated temperatures when installed in a rack or enclosed space.
When multiple Cisco 5500 Series Wireless Controllers are mounted in an equipment rack, be sure
that the power source is sufficiently rated to safely run all the equipment in the rack.
Verify the integrity of the electrical ground before installing the controller.
78-18998-01