ABB A101-H Series Instruções de montagem originais - Página 13
Procurar online ou descarregar pdf Instruções de montagem originais para Carregador de bateria ABB A101-H Series. ABB A101-H Series 20 páginas. Radial turbocharger
Imprimir páginaAssembly Instructions / A101-H
4 Installing the turbocharger / 4.2 Fitting threaded rods
4.2
Fitting threaded rods
Fastening material, scope of delivery
The threaded rods and nuts for fastening the turbocharger on the bracket are not included
in the ABB Turbo Systems scope of delivery.
Requirements for the threaded rods
Fig. 6: Requirements for threaded rods
Product
Diameter
Threaded rod
[mm]
A131-H
Ø 16 / M16
A136-H
Ø 20 / M20
Table 6: Requirements for threaded rods
Fig. 7: Fitting threaded rods onto the bracket
1. Lightly oil the surfaces of the threaded rods (02) to be screwed in.
2. Screw the threaded rods into the bracket with the aid of locknuts (01).
3. Remove nuts (01) again.
© Copyright 2019 ABB. All rights reserved.
Material
Thread length
DIN / ISO 898
(Part 1)
10.9 / 12.9
10.9 / 12.9
HZTL455311P0038_EN
Free length over
L1 [mm]
bracket
L2 [mm]
≥ 30
≥ 30
Rev.A
December 2019
195
225