DigiPos DS-820 Manual do utilizador - Página 9

Procurar online ou descarregar pdf Manual do utilizador para Impressora DigiPos DS-820. DigiPos DS-820 13 páginas.

Imprimir página

4. Self Test

The self-test result indicated whether the printer is operating properly. Also with this, user can check

following options or status of the printer.

Control circuit

Printer mechanism

Printing quality

ROM version

Interface setting

This test is independent of any other equipment or software.

Running the self test

1. Make sure the printer is turned off and the printer cover is closed properly before performing the

self test

2. Turn the printer on holding the FEED button, then the self-test will start. The self-test prints the

printer

setting value and then prints the following, and pauses. (Error LED On)

SELECT MODE BY BUTTON

1. ASCII PRINT

2. SELECT BAUDRATE MODE

3. HEXADUMP MODE

3. Press the FEED button consecutively (1~3)

1. ASCII PRINT

2. SELECT BAUDRATE MODE

(press the FEED button once)

(press the FEED button twice)

Set the speed of Serial Interface

Printing test page

(You can set the BAUDRATE in

constructed with ACII code.

this mode)

♣

Wait for 5~6 seconds if you want to exit. Printer performs a cutting when exiting this mode

4. The printer is ready to receive data after finishing setting.

3. HEXADUMP MODE

(press the FEED button triple time)

Printing the HEX value received

from the interface

5. ASCII Print

ASCII PRINT is printing a test page constructed ASCII code. You can able to check the printer works

properly with this

The ASCII PRINT test automatically ends and cuts the paper after printing the following:

*** Completed ***

The printer is ready to receive data as soon as it completes the ASCII PRINT.

6. Select Baudrate Mode

After entering the BAUDRATE MODE, the list which can select the BPS will be printed. Similar like Self Test,

you can press the FEED button to select a BAUDRATE.

Once the input performs properly, the printer shows a result and store.

The printer is ready to receive data as soon as it completes the SELECT BAUDRATEMODE.

SELECT BAUDRATE BY BUTTON

9600bps

2. 19200bps

3. 38400bps

4. 115200bps