Crest Audio BRBFMM Instalação

Procurar online ou descarregar pdf Instalação para Suporte para TV Crest Audio BRBFMM. Crest Audio BRBFMM 2 páginas. Full motion articulated tv wall mount

Imprimir página

Step 5: Level Adjustment

1. In some instances a slight adjustment might be required to level the TV.

2. Using a second person to help, extend the bracket out as far as it will go as shown in figure 5 and have the second person hold

the TV.

3. Loosen the tension of the 4 bolts directly behind the mounting plate (as shown in figure 6) enough so you can carefully

adjust the left and right level of the TV.

4. Once the correct position has been reached tighten the bolts back up again to lock the levels position. It is important not

to over tighten the bolts.

Not included

5 YEAR WARRANTY

Olbertz Holdings Pty Ltd ACN 010 003 933 trading as The Crest Company of 165 South Pine Road, Brendale, Queensland, 4500, Ph: 1800 812 261,

www.crest.com.au, warrants that if this Crest product purchased by you from The Crest Company or a retail outlet is found by The Crest Company to be defective

in workmanship or materials within 5 years of the date of purchase, The Crest Company will (at its election) either repair that product, replace the product, supply

an equivalent product or pay the costs of repairing or replacing the product or acquiring an equivalent product.

This limited warranty will not extend to or cover any expenses associated with removing, demounting the original product or installing the repaired, replaced or

equivalent product or all or any of its components, you must bear these expenses. It also does not cover damage or loss resulting from intentional or unintentional

misuse of, tampering with, alterations to or incorrect installation of this product or use of this product for purposes other than that for which it is designed or in a

manner inconsistent with the product's instructions. This limited warranty also does not apply to damage or loss resulting from fair wear and tear or events beyond

The Crest Company control including but not limited to natural disasters.

In order to claim under this warranty, you must contact The Crest Company and return to The Crest Company (via our nominated reply paid address) the product

and its components and proof of purchase (including the date and location of purchase) so that The Crest Company can verify the defect and your purchase.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure

and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of

acceptable quality and the failure does not amount to a major failure. The benefits given by this warranty are in addition to other rights and remedies which you

may have under a law in relation to the goods or services to which the warranty relates.

BRBFMM

FULL MOTION

TV WALL MOUNT

32"-75"

400 x 400 MAX

VESA COMPATIBILITY

100x200,200x200,300x300,Ł

400x200,400x400

Hardware Kit Contents

Tools Required

Proudly brought to you by:

DRYWALL INSTALLATION (TIMBER SUPPORTS):

• Adjustable spanner/socket set

• Philips head screwdriver

• Power drill

• High speed 4.5mm drill bit

• Stud finder

PO Box 5658 Brendale

QLD Australia 4500

• Spirit level and pencil

Customer Support

1800 812 261

www.crest.com.au

AUSTRALIAN OWNED

Articulate d

MEDIUM

50kg MAX

TV WEIGHT

The maximum supported

weight is up to 50kg

HIDDEN

-90° TO 90°

CABLE

PAN

-20° TO 10°

UP TO 473mm

TILT

EXTEND

SAFETY FIRST

Installation of this TV Wall Mount will be easier with

two people.

Some images in this guide may vary slightly from

the actual components supplied.

Ensure this instruction manual is completely read

and understood before attempting installation.

This TV Wall Mount MUST NOT be installed solely

in plasterboard, fibre cement and similar surfaces.

This TV Wall Mount MUST be installed in sound

supporting structures such as those made

of timber, steel or masonry using appropriate

fasteners.

The supporting structure must be capable of

sustaining the combined weight of the TV Wall

Mount and the display otherwise the structure

must be reinforced.

The fasteners supplied in this hardware pack

allow for fixing into timber and masonry only. If

installing into a supporting structure made of steel,

appropriate fasteners must be used and sourced

from an appropriate supplier.

Use appropriate tools and safety equipment and

ensure adequate ventilation during installation.

If uncertain about any aspect of installation,

contact The Crest Company or an installation

professional.

10. Please retain these instructions for future reference

6.3 x 55mm Lag Bolt

10 x 6 x 50mm Anchor

6 x 16 x 1.5mm Washer

MASONRY INSTALLATION:

• Adjustable spanner/socket set

• Philips head screwdriver

• Power drill with hammer function

• 10mm Masonry drill bit

• Spirit level and pencil

• Hammer