Cisco 8800 Series Manual do utilizador final - Página 3

Imprimir página

Cisco 8800 Series Manual do utilizador final

Using Phone Features (Continued)

Listen to Your Voice Messages

Press Messages

and follow the voice prompts. To

check messages for a specific line, press the line button

first.

Listen to Messages in a General Delivery

Mailbox

1. Press Messages

and enter the phone

password when prompted.

2. Press 9 to access General Develivary Mailbox (GDM).

All the GDMs available for your extension are listed.

3. Press the digit corresponding to the GDM you want to

access.

4. Press 1 to listen to the new messages. The new

messages are played.

5. Press 1 to repeat, 2 to save or 3 to delete the

message. If you save the message, other members

logging in to the GDM can listen to the message. If

you choose to delete, the message is deleted from the

GDM and other members cannot listen to the message.

Cisco Business Edition 4000 End User Guide

Configure Speed Dial Button

Before you configure speed dial, ensure that you have at

least one free line button.

1. Press Applications

2. Select My Phone Apps > Speed Dial Buttons.

3. Press Add.

4. Enter the label and number.

The label entered here is displayed on the line key

where speed dial is configured.

5. Press Submit.

6. Press Exit until you reach My Phone Apps screen.

7. Select Reset.

Forward All Calls

1. Select a line and press Forward all.

2. Dial the number that you want to forward to, or press

Voicemail.

3. To receive calls again, press Forward off.

Enable Privacy

Privacy feature blocks other users in the same shared line

from viewing or handling any activities on the shared line.

If your customer administrator has enabled Privacy Button

for your phone, a line button on your phone is assigned as

Privacy.

Press the Privacy line button to enable or disable Privacy

mode.

Update Single Number Reach

You can edit the Single Number Reach (SNR) number from

the phone only if SNR is configured on the Selfcare Portal.

For detailed steps on configuring SNR, see

Single Number Reach" on page

1. Press Applications

2. Scroll through the options to My Phone Apps and

3. Scroll through the options to Single Number Reach

4. Enter the lead digit to dial an outside line followed by

5. Press Submit.

Swap an Active Call from Desk Phone to

Mobile Phone

NOTE:

phone, you must have SNR configured on your extension.

From a call connected on the desk phone, press More (...)

and then press Mobility softkey. The call gets moved to

the mobile phone.

Press Mobility softkey on the desk phone again to swap

the call from mobile phone to desk phone.

press Select.

and press Select.

the phone number.

Contact your network administrator to know the lead

digit configured to dial an outside line.

Example: If 9 is the digit to dial an outside line, 1 is the

country code, 555 is the area code, and 9999999 is

the subscriber number, you must enter 915559999999.

To swap a call between desk phone and mobile

"Configure

November 2018