Caveats
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
•
•
•
•
•
•
Open Caveats
•
Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.1(3)
30
%ZONE-2-ZS_TCAM_PROGRAMMING_FAILED: %$VSAN xxx%$ TCAM operation failed : Unknown,
Reason: idxmap ioctl failure
Because of the programming failure, the port is effectively useless, even though it is up.
Workaround: This issue is resolved.
CSCsi33396
Symptom: Installation of the Oracle Express database fails if you are running Microsoft Windows
2000 and using the Hypersonic SQL database with Cisco Fabric Manager.
Workaround: This issue is resolved.
CSCsi41668
Symptom: If there are IVR-NAT rewrite rules for FCIP interfaces on an MDS 9000 MPS-14/2
module in an IVR border switch, updates or modifications of the rewrite rules may fail after the
MPS-14/2 module is upgraded to SAN-OS 3.1(2x) or lower. Stale IVR-NAT rules are left on the
FCIP interfaces rather than the required IVR-NAT rules, and this impacts IVR traffic over the FCIP
link.
There is no impact on traffic unless and until IVR rewrite rules need to be modified after an upgrade.
However, if the IVR rewrite information changes (such as when a virtual domain ID changes)
because of other events taking place in the fabric, then the stale IVR rewrite rules continue to
re-write the frames entering the FCIP interface with the old rewrite information. This may result in
frames with an invalid rewritten destination ID getting dropped or incorrectly forwarded in the
network. Frames with a source ID that is incorrectly rewritten will eventually be rejected or
incorrectly interpreted by the destination device.
Workaround: This issue is resolved.
CSCsi47053
Symptom: In SAN-OS 3.1(2b), if you authenticate users against a TACACS+ server, Fabric
Manager tries the second and third AAA servers, even though authentication against the first server
was successful.
Workaround: This issue is resolved.
CSCsi52049
Symptom: When enhanced zoning is enabled, an empty pop-up window displays in Fabric Manager
after a zone set activation completes.
Workaround: This issue is resolved.
CSCsi29922
Symptom: For security reasons, the addUser file should require a database password.
Workaround: This issue is resolved.
CSCsi29932
Symptom: A # symbol should be added to the front of the AAA.properties and server.properties
keys so that they can be decoded with a private key.
Workaround: This issue is resolved.
CSCei82909
OL-12208-05
Imprimir página