Accustic Arts CD-PLAYER I (MK 3) Manual de instruções - Página 9

Procurar online ou descarregar pdf Manual de instruções para Leitor de CD Accustic Arts CD-PLAYER I (MK 3). Accustic Arts CD-PLAYER I (MK 3) 10 páginas.
Também para Accustic Arts CD-PLAYER I (MK 3): Manual de instruções (14 páginas)

Imprimir página

7 Troubleshooting

Malfunctions are mostly caused by something simple which can be put right quickly.

In the next section some possible malfunctions are described together with their corrective action.

However, if it is not possible to remove the malfunction please contact your authorized dealer.

The unit was switched on, the blue LED 11 remains dark.

Malfunction

Cause 1

The mains cable is not properly connected.

Solution

Check mains cable and push in firmly.

The fuse 1 is damaged.

Cause 2

Solution

Pull out the mains plug and replace the corresponding fuse (see chapter

Malfunction

>SURROUND BYPASS< is connected but you hear no signal.

The button 9.1 isn't switched on

Cause 1

Push-button 9.1 on front panel.

Solution

Malfunction

The volume control does not react to the remote control.

Cause 1

The remote control transmitter does not send the right signal.

Solution

Check batteries and change if necessary.

Cause 2

The infrared receiver cannot receive the transmitted signal.

Solution

Always point the remote control transmitter directly towards the receiver diode and

remove any barriers which might possibly interfere.

For malfunctions which affect the reproduction of individual devices first of all make sure that all

connections are correctly and thoroughly carried out. In general errors which arise are often a result of

an unsatisfactory or wrongly made connection.

8 Specifications (selection)

Inputs:

Outputs:

Maximum gain:

Signal difference left/right:

Input resistance:

Output resistance:

Max. output voltage:

3 x fully balanced high level inputs (XLR)

2 x unbalanced high level input (RCA)

1 x unbalanced input (RCA) as "SURROUND BYPASS"

2 x fully balanced line-out (XLR)

1 x unbalanced line-out (RCA)

balanced:

3.7-times / +11.4 dB

unbalanced:

3.5-times / +10.8 dB

< 0.5 dB (from 0 dB to –40 dB)

balanced:

2 x 50 k

unbalanced:

50 k

2 x 34 

balanced:

34 

unbalanced:

balanced:

> 18 Veff on 10 k

unbalanced:

> 9 Veff on 10 k

5.7