Crestron TPS-4500IMPC Manual de operação - Página 7
Procurar online ou descarregar pdf Manual de operação para Painel tátil Crestron TPS-4500IMPC. Crestron TPS-4500IMPC 16 páginas. Crestron tps-4500impc touchpanel: operations guide
Imprimir página
Crestron TPS-4500IMPC
NTSC/PAL VIDEO
The NTSC/PAL video input consists of three connectors; two BNC
connectors for unbalanced video signals and one 6-pin mini-connector
for twisted pair wiring of balanced video signals. The video signal is
connected to these ports and requires a TPS-4500V or installation of the
TPS-VID-1 or TPS-VID-2 video card in a TPS-4500 touchpanel to
display video. Consult the latest revision of the TPS-4500V & 4500LV
Operations Guide (Doc. 6160), TPS-4500 & 4500L Operations Guide
(Doc. 5891), or TPS-VID-1/2 Operations & Installation Guide (Doc.
6059) for details. Use either the two BNC connectors or the six-pin
connector for twisted pair wiring when connecting a video source.
NOTE: BNC connectors are physically located next to the twisted pair
connectors. Image is for illustration purposes only. Refer to the physical
view of the TPS-4500IMPC on page 2 for actual connector positions.
NOTE: The TPS-4500IMPC allows the use of either balanced or
unbalanced signals for video input. To select the signal type to be used,
the DIP switches located on the opposite side of the device must be set in
the correct position. Refer to "BAL/COAX" on page 5 for more
information.
NET
This four-pin connector is used to connect to a Crestron control system
and other Cresnet peripherals in a system. It also provides network power
to the touchpanel if an external power pack is not used. If making
network connections to a control system or Cresnet peripherals, refer to
"Network Wiring" on page 5.
24 VDC, 2.0A (Power Supply)
24VDC
This female connector is used to supply 24 VDC power to the
2.0A
TPS-4500IMPC and the touchpanel from an optional power pack
(Crestron model PW-2420RU). When power is supplied to the TPS-
4500IMPC through this connector, a Cresnet power connection is not
required to display video on the touchpanel.
CAUTION: Use only Crestron power supplies for Crestron equipment.
Failure to do so could cause equipment damage or void the Crestron
warranty.
Operations Guide - DOC. 6163
Interface Module
Interface Module: TPS-4500IMPC • 3