Cisco Catalyst 3560-CX Manual - Página 20
Procurar online ou descarregar pdf Manual para Interruptor Cisco Catalyst 3560-CX. Cisco Catalyst 3560-CX 27 páginas. Managing switch stacks
Também para Cisco Catalyst 3560-CX: Visão geral do produto (15 páginas), Manual (24 páginas)
Imprimir página
Monitoring the Device Stack
Step 1
Disconnect the stack cable between Port 1 on Switch 1 and Port 2 on Switch 4.
Step 2
Remove Switch 4 from the stack.
Step 3
Add a switch to replace Switch 4 and assign it switch-number 4.
Step 4
Reconnect the cable between Port 1 on Switch 1 and Port 2 on Switch 4 (the replacement switch).
Step 5
Reenable the link between the switches. Enter the switch 1 stack port 1 enable privileged EXEC command to enable
Port 1 on Switch 1.
Step 6
Power on Switch 4.
Caution
Powering on Switch 4 before enabling the Port 1 on Switch 1 might cause one of the switches to reload.
If Switch 4 is powered on first, you might need to enter the switch 1 stack port 1 enable and the switch 4
stack port 2 enable privileged EXEC commands to bring up the link.
Monitoring the Device Stack
Table 3: Commands for Displaying Stack Information
Command
show switch
show switch stack-member-number
show switch detail
show switch neighbors
show switch stack-ports
Managing Switch Stacks
20
Description
Displays summary information about the stack, including the status of
provisioned switches and switches in version-mismatch mode.
Displays information about a specific member.
Displays detailed information about the stack.
Displays the stack neighbors.
Displays port information for the stack.
Managing Switch Stacks