FIBER FOX Mini 6SI Manual do utilizador - Página 5

Procurar online ou descarregar pdf Manual do utilizador para Hardware de rede FIBER FOX Mini 6SI. FIBER FOX Mini 6SI 16 páginas.

Splice Programs

Splice Menu, Maintenance, Stabilize Electrodes, Setting, User Instruction, Arc Calibration

In the event of sudden change in environmental conditions or after cleaning electrodes, the arc power

sometimes becomes unstable, resulting in higher splice loss. Especially when the splicer is moved

from lower altitudes to higher , it takes time for the arc power to stabilize. In this case, stabilizing

electrodes will expedite the process to set the arc power stable. If many tests are needed to get the

"Test ok" message appears in [Arc calibration], use this function as well.

Atmospheric conditions such as temperature, humidity, and pressure are constantly changing, which

creates variability in the arc temperature. This splicer is equipped with temperature and pressure

sensors that are used in a constant feedback monitoring control system to regulate the arc power

at a constant level. However, changes in arc power due to electrode wear and glass adhesion cannot

be corrected automatically. Also, the center position of arc discharge sometimes shifts to the left or

to the right. In this case, the fiber splicing position has to be shifted in relation to the arc discharge

center. It is necessary to perform an arc power calibration to eliminate those problems.

Note : Performing [Arc calibration] function changes the arc power "Factor" value. The factor value is

used in the algorithm program for all splicing. The arc power value will not change in the splice modes.

- 8 -

Select Splice Mode

Edit Splice Mode

Delete Splice Mode

Factory Pre-set : 33ea

User edit : 33ea

Custom build splice mode : 1ea

- 9 -