DigiSport DT500 Manual de instruções - Página 2

Procurar online ou descarregar pdf Manual de instruções para Ver DigiSport DT500. DigiSport DT500 10 páginas. Pro-stopwatches

Imprimir página
ENGLISH
www.digisportinterntional.com
INSTRUCTION MANUAL
DT500
FEATURES:
- Hour, minute, seconds, month, date, day and alarm 12/24 hour and month/date or date/month display user selectable
- 500 memories
- Segregated memory (capability to memorize LAP times of different races)
- User Selectable LAP/SPLIT or LAP/SPEED display
- Average and best lap time display
- Automatic release of LAP time after 10 seconds to allow progress monitoring.
- Data can be printed by printer (DT 500P optional) at operation or selectively by race later
- Data can be uploaded to computer through upload cable with software (cable and software optional)
- Dual timers which start one after another for use in training programs
- Can be used as ordinary countdown timer if 2nd timer is not set
TIME SETTING:
1. Press C to go to the TIME MODE (fig 24).
2. Press and hold B button will go into the TIME SET mode with the AL HOUR blinking.
3. Press A to set the AL HOUR.
4. Press B to select digits in the following sequence: AL HR, AL MIN first digit, AL MIN 2nd digit, AL
OFF/ON, YEAR last digit, YEAR 1st digit, MONTH, DATE, 12/24HR selection, HOUR, MIN 1st
digit, MIN 2nd digit, and SECONDS.
5. Press A to set the blinking digits.
6. Pressing C any time during this setting sequence will complete the setting procedure and return to the normal TIME display. If
12HR option is selected the calendar will be shown as MONTH/DATE/YEAR and time will be displayed in 12 HOUR system. If 24HR
option is selected, the calendar will be displayed as DATE/MONTH/YEAR and time will be displayed in 24HOUR system. The
calendar automatically adjusts for weekday and odd and even months including February of leap years up to year 2089.
7. Press D in the TIME mode to arm or disarm the alarm. When the alarm is armed the alarm indicator will be turned on
and the alarm will sound at the preset alarm time.
CHRONOGRAPH OPERATION:
1. Press C to go to the CHRONOGRAPH MODE. The display as shown in Fig. 2.
2. Press A to start.
SPEED DISPLAY:
1. In the CHRONO MODE before the start of a race, push and hold B for 2 seconds will go to the SPEED SET mode as is shown in
Fig.14.
2. The first digit in the lowest row is flashing to indicate setting of the thousandth digit of distance.
3. Push A to set and B to select the next digits. The highest setting for distance is 9999.999.
4. After the digits are set press B again to set the TIME unit with the top left corner HR flashing.
5. Use A to set to HR (for /hour), MIN (for /minute) or SEC (for /second).
6. When the distance and time unit are set, press C button to return to the SPEED MODE (Fig. 15). (Pushing C button anytime during
the setting will return to the SPEED mode).
7. Press A to start, the display is as shown in Fig.16.
8. Press B to get the 1st LAP time at the top row and the speed at the middle row, as shown in Fig.17.
9. If for example the distance is set to 200 meters and time unit set is in seconds, the speed calculated from a LAP time of 17.09
seconds is 11.70 m/sec. [Using the B button the LAP times and their corresponding speeds can be displayed. Recall operations in
the SPEED mode are the same as in the LAP/SPLIT mode.]
SPLIT TIME DISPLAY:
1. Press B to get the 1st LAP time. The LAP time is shown at the top row, the SPLIT time at the middle row and the running total time
is shown at the lower row, as shown in Fig.3.
2. 10 seconds later the display will automatically be released to show the running LAP and SPLIT times to allow the user to keep
track of progress, as shown in Fig. 4.
3. Press B to display the 2nd LAP time.
4. Press A to stop.