Sharp Carousel R-1871 Manual de instruções de instalação - Página 7

Procurar online ou descarregar pdf Manual de instruções de instalação para Forno micro-ondas Sharp Carousel R-1871. Sharp Carousel R-1871 8 páginas. Over-the-range microwave oven/hood system
Também para Sharp Carousel R-1871: Manual de operação (32 páginas), Brochura e especificações (8 páginas), Manual de instalação (9 páginas), Suplemento ao Manual de Serviço (24 páginas)

4. Thread the power supply cord through the hole made in the bot-

tom of the top cabinet.

5. Hang the oven on the lower edge of the mounting plate. Rotate the

unit upward. See Figure 22. Take care that the power cord is able

to clear the edge of the hole as the oven is rotated upward. (In the

case of a non-recessed bottom in the top cabinet, the hole for the

cord may need to be enlarged.) Remove the carton portions.

6. Tighten the two unit mounting screws located in the grease filter

openings. See Figure 23.

7. Install grease filters by fitting into the opening. Push back and up

into place. See Figure 24.

8. Use the two Top Cabinet Screws (D) and two Flat Washers (E),

supplied in the INSTALLATION HARDWARE, to attach the unit to

the top cabinet. See Figure 25.

9. Make a bundle of the power supply cord and place it inside the

cabinet.

Unit mounting

screw

Figure 23

Figure 25

Grease filter

Figure 24

Grommet (for metal

cabinet only)

(D)

(E)

Hang at these

locations

(A)

Figure 22