Sharp AQUOS LC-22GA3H Manual de operação - Página 15
Procurar online ou descarregar pdf Manual de operação para TV LCD Sharp AQUOS LC-22GA3H. Sharp AQUOS LC-22GA3H 33 páginas. Lcd colour television
Imprimir página
Preset (Continued)
Channel Setting (AUTO)
1
Press MENU to display the Menu screen.
2
Press \/| to select "SETUP".
3
Press '/" to select "CH SETUP", and press OK.
4
Press '/" to select "AUTO", and press OK.
5
Press '/" to select "SOUND SYSTEM". Each time
you press \/|, the setting for individual items
changes as shown in the table on the right.
S O U N D
S Y S T E M
S T A R T
S E A R C H
6
Press '/" to the select "START SEARCH", and press
OK to begin the automatic programme search.
7
When the automatic programme search is completed,
the channel first received will be displayed.
Channel Setting (MANUAL)
1
Perform steps 1 and 2 in Channel Setting (AUTO) to
display the Setup Menu screen.
2
Press '/" to select "CH SETUP", and press OK.
3
Press '/" to select "MANUAL", and press OK.
4
Press '/" to select the desired adjustment item.
P O S I T I O N
C O L O U R
S Y S T E M
S O U N D
S Y S T E M
S K I P
F I N E
N I C A M
A 2
5
Each time you press \/|, the setting for individual
items changes as shown in the table on the right.
6
Press MENU to exit.
14
LC-22GA3H_E_P10-15.p65
B / G
C H
1
A U T O
B / G
O F F
8 7 1 . 1
0
M H Z
O F F
O F F
14
Selected item
POSITION
The channel position changes to the upper or lower
number.
COLOUR SYSTEM
The mode changes in the following order:
PAL
AUTO
SECAM
PAL60
N443
N358
SOUND SYSTEM
The mode changes in the following order:
B/G
I
D/K
M
SKIP
The mode changes in the following order:
ON
OFF
Channel numbers with a "● (RED)" mark on the left are
set to Skip.
To turn off Skip, press Channel Select to select the
desired channel, and then set the Skip mode on the CH
setup menu to "OFF".
FINE
The frequency changes to allow fine tuning.
NICAM
The broadcast sound system changes in the following
order:
ON (NICAM sound)
A2
Stereo system changes in the following order:
ON (A2 sound)
NOTE
• Switching Colour system:
Set the system to Auto for normal TV reception. The Auto mode
automatically detects the receiving signal system and changes the
reception system of the LCD TV set. When the picture or sound is
not stable, switching to an appropriate system may improve the
picture or sound quality.
• When using Fine tuning, the channel number changes from green
to yellow.
• To return the channel to its original frequency setting, follow the
manual channel preset procedure. (For details "Presetting the
Channels (MANUAL)", see page 13.)
CLOCK SETUP
The Timer functions that turn power on at the specified time
do not work unless the clock has been adjusted. Be sure to
adjust the clock first.
1
Perform steps 1 and 2 in Channel Setting (AUTO) to
display the Setup Menu screen.
2
Press '/" to select "CLOCK SETUP", and press OK.
3
Press '/" to set the time, and press OK.
• Holding down '/" changes the setting at a high speed.
:
:
0 0
0 0
0 0
4
Press MENU to exit.
2004.9.9, 5:23 PM
Description
OFF (Monaural TV sound)
OFF (Monaural TV sound)