Crestron CAEN-MK Manual de instalação - Página 5

Procurar online ou descarregar pdf Manual de instalação para Racks & Stands Crestron CAEN-MK. Crestron CAEN-MK 8 páginas. Caen mounting kit

Crestron CAEN-MK

Installation Guide - DOC. 6130

Mounting

NOTE: This assembly must be installed in accordance with local building codes.

Tools/hardware required

#2 Phillips tip screwdriver

8B x ¼"L Self-tapping screws (quantity four, supplied)

Flat tip screwdriver (optional)

Complete the following procedure (refer to illustration below) to mount the

assembly.

1. Position the assembly to be mounted in front of an available space in a

Crestron CAEN enclosure (at the bottom of a single-width enclosure or

across two side-by-side spaces in a double-width cabinet) to determine

the location of the mounting holes. After determining the position,

remove the assembly and continue to step 2.

2. Remove any required knockouts to route any required wiring outside of

the enclosure.

3. Using a #2 Phillips tip screwdriver, install four screws (supplied) half

way into the CAEN enclosure.

4. With the assembly in hand, position the large portion of the left

bracket's keyholes over the screws on the left side of the installation

location. Hold the unit flat against the back plane of the CAEN

enclosure, and slide the slotted portion and right-hand brackets under

the screw heads.

5. Tighten the four screws to secure the assembly to the enclosure.

Install Assembly into CAEN

SCREWS, SELF-TAPPING

8B x

6. If required, make any AC electrical connections using the supplied DIN

rail terminal blocks and a flat tip screwdriver.

CAEN Mounting Kit

CAEN Mounting Kit: CAEN-MK • 3