Sharp AQUOS LC-32SB24U Manual de operação - Página 21
Procurar online ou descarregar pdf Manual de operação para TV LCD Sharp AQUOS LC-32SB24U. Sharp AQUOS LC-32SB24U 33 páginas. Lcd color television
Também para Sharp AQUOS LC-32SB24U: Manual do utilizador (32 páginas), Manual de operação (33 páginas), Manual de serviço (10 páginas)
Imprimir página
On-Screen
Display
Menu
This setting
allows you to skip the HDMI or PC-IN Input
("Input
4 (HDMI)",
"Input 5 (HDMI)" and "Input 6 (RGB)")
on the Input Selection
operation.
Yes: Skips the input,
No: Does not skip input.
Some input signals
may have to be registered
manually
to display
properly.
The pair of input signals (resolutions)
in the list below is not distinguishable
when received.
In such a case, you have to set the correct
signal
manually.
After setting once,
it will display when the
same signal (resolution)
is input again.
El 024 x 768
1360 x 768
J
You can only select the "Input Signal" on the Setup menu
when receiving one of the 2 input signals listed above.
For automatically
adjusting
the PC image.
Yes: Auto Sync. starts and "Now adjusting the image _'
displays,
No: This function does not work.
When Auto Sync, is successful, "Completed"
displays, If
not, Auto Sync. failed
Auto Sync. may fail even if "Completed"
displays
Auto Sync. may fail if the computer image has low
resolution, has unclear (black) edges, or is moved while
executing Auto Sync.
• Be sure to connect the PC to the TV and switch it on before
starting Auto Sync.
Ordinarily
you can easily adjust the picture as
necessary
to change
image
pos_ion
using Auto Sync.
In some cases, however,
manual adjustment
is needed
to optimize
the image.
N-Pos.:
Centers the image by moving it to the left or
right,
V-Pos.: Centers the image by moving it up or down
Clock: Adjust when the image flickers with vertical
stdpes,
Phase: Adjust when characters have low contrast or
when the image flickers
For resetting all Fine Sync. adjustment items to the facto/y
preset values, press h,/T
to select "Reset", and then press
ENTER
k is not necessa/y to adjust the "Clock" or "Phase" when a
digital signal is being input, so it cannot be selected
The default cursor position may not be in the center
because the screen position variable ranges may be
asymmetrical.
• The screen position variable ranges depend on the View
Mode or the signal type. The ranges can be seen on the
position setting screen
Lets you set the input terminal
displayed
when using
the INPUT SOURCE
menu or channel
display.
Press
&IT/_/11_
to select the new name for the input
mode.
You cannot change labels if the INPUT SOURCE is _V
For adjusting
a picture's
horizontal
and vertical
position.
N-Pos.:
Centers the image by moving it to the left or
right,
V-Pos.: Centers the image by moving it up or down
• For resetting adjustments to the factory preset values,
press A/_'
to select "Reset", and then press ENTER.
• When connecting a PC to the HDMI terminal, the image
position will be automatically adjusted It cannot be
manually adjusted.
The screen position variable ranges depend on the View
Mode or the signal type. The ranges can be seen on the
position-setting
screen.
Adjustments
are stored separately according to input
source
You can also select a language
from the Setup menu.
Select from among
3 languages:
English, French and
Spanish.
If complex
adjustments
are made and the seltings
CaRROt be restored
to noRY/al, you can reset the
settings
to the factory
preset values.
1 "Return to the factory preset values"
displays
on the
screen.
If you have already set the Secret No, input the 4-digit
secret number here See page 22 for setting a secret
number
2
Select "Yes".
"Now, TV will restart automatically
OK?" displays on the
screen
8
Select "Yes".
"Now initializing.,," displays on the screen and blinks,
After the reset has been completed, the power shuts off
and then comes back on The screen will have returned
to its original settings,
The Channel Setup settings will not be changed
The Language settings will not be changed.
The Secret number settings will not be changed
The TV Location Settings will not be changed