Fiber Tronix FT-HHRX-1000-SC-MINI-V2 Manual do utilizador - Página 7
Procurar online ou descarregar pdf Manual do utilizador para Recetor Fiber Tronix FT-HHRX-1000-SC-MINI-V2. Fiber Tronix FT-HHRX-1000-SC-MINI-V2 10 páginas. Catv ftth receiver
Imprimir página
5.3
Installation
5.3.1 Receiver easily attaches to the wall using the mounting holes on the
rear of the device.
5.3.2 Check 12V voltage by digital multimeter in accordance with power requirement. .
Then plug in DC power adapter. FT-HHRX-1000-SC-MINI-V2 can be powered by
10-18V DC power adapter. When DC power is ON, the DC power LED shall
be Green.
5.3.3 Check the input power to FT-HHRX-1000-SC-MINI-V2 optical receiver
(higher than -15dBm@1550nm). Make sure that the fiber connector to
FT-HHRX-1000-SC-MINI-V2 is SC/APC or the required connector.
The OPT LED will be Green when the input optical power is higher than -15dBm.
5.3.4 Connect FT-HHRX-1000-SC-MINI-V2 with coaxial cable to TV or DVB-C STB.
FT-HHRX-1000-SC-MINI-V2 Manual
Two hole distance is
2.83" (72mm.)
Need 2 x M3-20mm screws
7