DIGISYNTHETIC DS212 Manual de instruções - Página 6

Procurar online ou descarregar pdf Manual de instruções para Stereo Equalizer DIGISYNTHETIC DS212. DIGISYNTHETIC DS212 13 páginas. 24-bit dual engine automatic feedback destroyer/parameter eq

Imprimir página

(3) "CH:" -- Adjustable Left/Right channel menu display. "CH: L" & "CH: R" indicate able to edit left & right

channel respectively. "CH: LR" means left & right channel is able to edit at the same time.

(4) "EQ" -- When this symbol is seen to indicate "EQ-ON". To on all filter: "EQ-OF", Auto & Single not affected,

"BYPA." -- BYPASS mode, all filter effect is not functioning.

(5) "FILT:"-- Able to select any filter from 1~12 by jog wheel when ":" blinks.

(6) ":PEQ"-- Turning rotary jog wheel while ":" blinking to select 4 types of filter mode from: OFF (off), PEQ

(parametric EQ), AUTO(automatic) & SING(single).

(7) To edit parameters of filter and parametric EQ. LCD reads "SV" to remind user that editable parameters is

ready for save & memory by 2 seconds

fast

for 1 second interval to remind user whether to save or not. Presses "STORE" button one time to save

and "SV" will disappear to indicate edited parameters had been save in present sequence. (If user does not

press "STORE" while "SV" blinking

2.2 Function Buttons & Jog Wheel

(1) PARAM/PUSH- Rotary Jog wheel with ON/OFF ability. While selecting "PEQ" in filter mode, press jog

wheel to enter parametric EQ editing (as fig.2.4).

FREQ: To select desire frequency

GAIN: To increase or decrease values for selected filter

BAND: To decide frequency band for selected filter, adjustable values from 2-time frequency range (120/60-

octave range) to 1/60 octave range.

(2) FILTER SEL- Sequence & Filter Select Button. Available 12 Filters or 10 channels. Press once to enter

Filter, press second times to enter sequence selects.

(3) FILTER MODE- Filter Mode Select Button. Press this button and turn jog wheel to activate "OFF" (off),

"PEQ" (parametric EQ), "SING" (single) & "AUTO" (automatic) modes. Press FILTER MODE & PARAM

/PUSH button together for 1 second, you are able to adjust Threshold of feedback compression from -3~-9dB.

(4) CHL, (5) CHR- Left and Right channel parameters button enable left & right channel editing. Press CHL

& CHR button to activate left & right channel function. Press left channel button "CHL" before pressing

"CHR" button to copy left channel parameters to right channel.

(6) IN/OUT (input/output) Button- allows optional bypassing of the parametric equalizer or all filters.

(7) STORE Button- Any preset parameters can be edited by STORE button. (Remarks: Press twice to store

data and symbol "SV" will disappear.)

slow

blinking interval. Press "STORE" button once and it will blink

fast

within 10 times, it will go back to

FILTER SET

CHL

IN/OUT

FILTER MODE

CHR

STORE

COUPLE

PARAM/PUSH

Fig 2.3 Function Buttons & jog wheel

FEEDBACK DESTROYER

CLIP

FILE

CLIP

24 BIT DIGITAL PROCESSOR

Fig 2.4 Parametric EQ menu

POWER

MIDI

EQ-ON

PEQ

slow

blink)

Page 5