Sharp 92L2390137W010 Manual de operação - Página 10

Procurar online ou descarregar pdf Manual de operação para Sistema estéreo Sharp 92L2390137W010. Sharp 92L2390137W010 28 páginas.

Imprimir página

1. Specifications

System connections (continued)

CD-BK137W

„ To mount the surround speakers on the

wall

The design of the surround speakers allows them to be hung on the wall. Be sure to

use the type and size of screw that is shown to the below.

5 mm (3/16")

Min. 22 mm (7/8")

Drive one screw through the

wall for each speaker.

z Make sure that both the screw

and the wall can support a load

of 20 kg (45 lbs.).

z Drive the screws, so there is

about a 5 mm (3/16") space be-

tween the wall and the head of

the screw.

Mount the surround speaker

on the wall so that the screw

head is inserted into the slot

on the surround speaker.

„ Setting the AC voltage selector

Check the setting of the AC voltage selector located on the rear panel before plug-

ging the unit into an AC socket. If necessary, adjust the selector to correspond to the

AC power voltage used in your area.

Turn the selector with a screwdriver until the appropriate voltage num-

ber appears in the window (110 V, 127 V, 220 V or 230 V - 240 V AC).

E-9

ENGLISH

3.2 mm (1/8")

9 mm (3/8")

5 mm (3/16")

Wall mounting screw

Min. 17 mm (11/16")

Wall surface

Demonstration mode (See page 11.)

„ Connecting the AC power lead

After making all connections, connect the AC power lead to the unit

and then into the wall socket. If you plug in the unit first, it will enter

the demonstration mode.

Notes:

z Unplug the AC power lead from the AC socket if the unit will not be in use for a pro-

longed period of time.

z Never use a power lead other than the one supplied. Use of a power lead

other than the one supplied may cause an electric shock or fire.

AC Plug Adaptor

In areas (or countries) where an AC socket as shown in illustration

nect the unit using the AC plug adaptor supplied with the unit, as illustrated. The AC

plug adaptor is not included in areas where the AC wall socket and AC power plug

can be directly connected (see illustration

„ Headphones

z Before plugging in or unplugging the headphones, reduce

the volume.

z Be sure your headphones have a 3.5 mm (1/8") diameter

plug and are between 16 ohms and 50 ohms impedance.

The recommended impedance is 32 ohms.

z Plugging in the headphones disconnects the speakers

automatically. Adjust the volume using the VOLUME but-

tons.

01/8/28

CD-BK137W(X)E1.fm

is used, con-