Sharp 92L2390137W010 Manual de operação - Página 15
Procurar online ou descarregar pdf Manual de operação para Sistema estéreo Sharp 92L2390137W010. Sharp 92L2390137W010 28 páginas.
7
Press the
/
(
) button to start playback.
z Playback will begin from track 1 on the disc you have selected to play. After
that disc finishes playing, the next disc will automatically start playback.
z When the last track on the third disc has finished playing, the CD player will
stop automatically.
z When there is no CD in one of the disc 1 - 3 positions, that position will be
skipped and the next CD will be played.
To interrupt playback:
Press the
button on the remote control.
To resume playback from the same point, press the
To stop playback:
Press the
(CD ) button.
To remove the CDs:
Whilst in the stop mode, press the
OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press the DISC SKIP button to
rotate the disc tray and remove the remaining disc.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Caution:
z Do not place two CDs in one disc tray.
z Do not push the disc tray whilst it is moving.
z Do not turn the disc tray by hand. This may cause malfunctions.
z If the power fails whilst the tray is open, wait until the power is restored.
z If the disc tray is stopped forcibly, "ERR 0203" will appear in the display and the
unit will not function. If this occurs, press the ON/STAND-BY button to enter the
power stand-by mode and then turn the power on again.
z If TV or radio interference occurs during CD operation, move the unit away from
the TV or radio.
z If a disc is damaged, dirty, or loaded upside down, the disc will be skipped.
„ To locate the beginning of a track
To move to the beginning of the next track:
Press the
To restart the track being played:
Press the
Note:
You can locate the beginning of a track on a single disc only.
button.
„ To locate the desired portion
For audible fast forward:
Press and hold down the
For audible fast reverse:
Press and hold down the
Notes:
z Normal playback will resume when the
z You can locate the desired portion on a single disc only.
z When the end of the last track is reached during fast forward, "END" will appear on
the display and CD operation will be paused. When the beginning of the first track
is reached during fast reverse, the unit will enter the playback mode.
/
button for less than 0.5 seconds during playback.
z You can skip to any track by pressing the
/
button repeatedly until the desired
track number appears.
/
button for less than 0.5 seconds during playback.
z You can skip to any track by pressing the
/
button repeatedly until the desired
track number appears.
/
button during playback.
/
button during playback.
/
or
/
01/8/28
CD-BK137W(X)E2.fm
CD-BK137W
button is released.
ENGLISH
E-14