Sharp CD-DP900H Manual de operação - Página 19

Procurar online ou descarregar pdf Manual de operação para Sistema estéreo Sharp CD-DP900H. Sharp CD-DP900H 40 páginas. Mini component system
Também para Sharp CD-DP900H: Manual de operação (40 páginas)

Imprimir página
Sharp CD-DP900H Manual de operação

Setting the clock

In this example, the clock is set for the 24-hour (0:00) display.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK button and within 5 seconds, press the MEMO-
RY/SET button.
3
Press the TUNING/TIME (
hour display and then press the MEMORY/SET button.
"0:00"
"AM 12:00"
"AM 0:00"
Note that this can only be set when the unit is first installed or it has been reset.
[Refer to "Clearing all the memory (reset)" on page 30 for details.]
Downloaded From Disc-Player.com Sharp Manuals
or
) button to select 24-hour or 12-
The 24-hour display will appear.
(0:00 - 23:59)
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
4
Press the TUNING/TIME ( or ) button to adjust the hour and then
press the MEMORY/SET button.
Press the TUNING/TIME (
or
) button once to advance the time by 1 hour.
Hold it down to advance continuously.
When the 12-hour display is selected, "AM" will change automatically to "PM".
5
Press the TUNING/TIME (
or
) button to adjust the minutes and
then press the MEMORY/SET button.
Press the TUNING/TIME (
or
) button once to advance the time by 1
minute. Hold it down to change the time in 5-minute intervals.
The hour will not advance even if minutes advance from "59" to "00".
The clock begins counting from "0" seconds. (Seconds are not displayed.)
The time display will disappear after a few seconds.
To confirm the time display:
Press the CLOCK button.
The time display will appear for about 5 seconds.
Note:
The "CLOCK" or time will flash at the push of the CLOCK button when the AC power
supply is restored after a power failure or unplugging the unit.
Readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from step 1. If the time display is flashing, step 3 (for
selecting the 24-hour or 12-hour display) will be skipped.
To change the 24-hour or 12-hour display:
1
Clear all the programmed contents. [Refer to "Clearing all the memory (reset)" on
page 30 for details.]
2
Perform "Setting the clock" from step 1.
02/1/11
CD-DP900H(H)_1.fm
CD-DP900H
ENGLISH
1
2
3
4
5
6
7
8
E-12