Sharp CD-MPX100E Manual de início rápido - Página 2
Procurar online ou descarregar pdf Manual de início rápido para Sistema estéreo Sharp CD-MPX100E. Sharp CD-MPX100E 2 páginas. Mini component system
Também para Sharp CD-MPX100E: Manual de operação (36 páginas)
Imprimir páginaListening to a CD or MP3/WMA diisc
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Press the OPEN/CLOSE
button to open the disc tray.
4
Place the disc on the disc tray, label side up.
When loading a third disc, press the DISC SKIP button to turn the
disc tray, then place the disc in the open position.
5
Press the OPEN/CLOSE
button to close the disc tray.
6
To select the disc you want to listen to first, press one of the
1 -
3 buttons on the remote control.
7
Press the
/
button to start playback.
Listening to the radio
DISPLAY
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the desired
frequency band (FM or AM).
3
Press the TUNING (
or
) button to tune in to the desired station.
When the TUNING button is pressed for more than 0.5 seconds,
scanning will start automatically and the tuner will stop at the first
receivable broadcast station.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
G "
" will appear when an FM broadcast is in stereo.
FM stereo mode indicator
FM stereo receiving indicator
XL-MPX100E_QG
12 cm (5")
8 cm (3")
MINI COMPONENT SYSTEM CD-MPX100W
2
Listening to a cassette tape
1
Press the ON/STAND-BY button to turn the power on.
2
Open the cassette compart-
ment by pushing the area
marked " ".
3
Load a cassette into the
TAPE 1 compartment or
TAPE 2 compartment with
the side to be played facing
towards you.
4
Press the tape (1
2) button to select the cassette you want to
listen to.
5
Press the
/
button to start
playback.
I If trouble occurs
When this product is subjected to strong external interference (mechanical
shock, excessive static electricity, abnormal supply voltage due to
lightning, etc) or if it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power on again.
2. If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
I Clearing all the memory (reset)
1. Press the ON/STAND-BY button to enter the power stand-by
mode.
2. Whilst pressing down the
X-BASS/DEMO button, press the REC PAUSE button until "CLEAR
AL" appears.
Caution:
This operation will erase all data stored in memory including clock, timer
settings, tuner preset, and CD programme.
I Maintenance
Routine maintenance is required for continued optimum
performance, refer to the operation manual.
15/03/2005, 11:09 am
TAPE 1
TAPE 2
Tape play indicator
PRESET
button and the