Sharp CD-RW5000 Manual de operação - Página 23

Procurar online ou descarregar pdf Manual de operação para Sistema estéreo Sharp CD-RW5000. Sharp CD-RW5000 48 páginas. Audio tower system
Também para Sharp CD-RW5000: Manual rápido (8 páginas)

Imprimir página
Sharp CD-RW5000 Manual de operação

Listening to the Radio

*RW5000_P18_24(Playback)
23
Tuning
1
Press the POWER button to turn the power on.
2
Press the TUNER (BAND) button to select the desired frequency
band (FM or AM).
3
Press the TUNING (X X X X X or W W W W W ) button to tune into the desired sta-
tion.
Manual tuning:
Press the TUNING (X or W) button as many times as required to tune into the
desired station.
Auto tuning:
When the TUNING (X or W) button is pressed for more than 0.5 seconds,
scanning will start automatically and the tuner will stop at the first receivable
broadcast station.
Notes:
When radio interference occurs, auto scan tuning may stop automatically at
that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING (X or W) button again.
4
To receive an FM stereo transmission, press the ST-MODE but-
ton on the remote control. The "ST" indicator lights up.
"j" will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the ST-MODE button. The "ST" indicator
goes out. The reception changes to monaural, and the sound becomes clearer.
After use:
Press the POWER button to enter the power stand-by mode.
00.7.13, 3:15 PM
23