Sharp 1456 series Manual online - Página 30

Procurar online ou descarregar pdf Manual online para Impressora tudo em um Sharp 1456 series. Sharp 1456 series 37 páginas.

Imprimir página

Faint, Uneven or Smeared Print Output

If print output is faint, uneven or smeared, follow the steps listed below.

CHECK1

Has the printer driver been specified to suit

both paper and the print job?

You can select "Draft", "Normal" or "Photo" for the

print quality in the "Advanced" tab of the printer

driver setup screen. When "Photo" is selected, you

can click the "Image Adjustment" button and adjust

the brightness and contrast in the dialog box that

appears. Adjust these settings appropriately for

your print data and try printing again.

Reference:

Printer Driver Settings

CHECK2

Is the paper curled?

If the paper is curled, straighten it up and set it in

the unit again.

CHECK3

Is the paper too thick or too thin?

Only paper weighing from 56 to 80g/m

used in the paper tray. Only paper weighing from 52

to 128g/m

can be used in the multi-bypass tray

and single bypass.

CHECK4

CHECK5

can be

Is it near time to replace the TD cartridge or

drum cartridge?

When it is near time to replace the TD cartridge or

drum cartridge, the TD cartridge replacement

required (

) indicator or drum cartridge

replacement required (

) indicator will light

steadily on the unit operation panel. When it is time

to replace either cartridge, the indicator will blink.

Replace the cartridge and try printing again.

Reference:

See "TD CARTRIDGE REPLACEMENT",

"DRUM CARTRIDGE REPLACEMENT"

and "ABOUT SUPPLIES AND OPTIONS"

in the Operation Manual.

Did you set sufficient margins in the paper

settings of your application?

If the margins are set outside of the quality

guaranteed area, smudges or smears may appear

at the upper and lower edges of the paper.

When selecting the paper settings in the

application, set the margins from the top, bottom,

left and right edges of the paper to 4 mm.

CONTENTS

INDEX