Sharp AR-M450 Imager Manual de operação - Página 6

Procurar online ou descarregar pdf Manual de operação para Impressora tudo em um Sharp AR-M450 Imager. Sharp AR-M450 Imager 40 páginas. Ar-m280 | ar-m350 | ar-m450 operation manual (for network scanning)
Também para Sharp AR-M450 Imager: Brochura e especificações (11 páginas), Manual de peças (30 páginas), Manual de operação (32 páginas), Manual de Recarga (8 páginas)

Imprimir página

PART NAMES AND FUNCTIONS

Operation Panel

Touch panel (next page)

The machine status, messages and touch keys are

displayed on the panel. When the machine is in the

standby state, the display will change if the [PRINT]

key, [IMAGE SEND] key or [COPY] key is pressed

to show the current status of these modes.

Mode select keys

Use to select the basic modes of the product.

[COPY] key

Press to select the copy mode and display the basic

screen of the copy mode. (next page)

Even when the machine is busy in another mode,

the basic copy mode screen will appear when the

[COPY] key is pressed. If this key is pressed and

held while the basic screen of the copy mode is

displayed, the total output count and the quantity of

toner remaining (percentage) will be displayed.

Numeric keys

Use to select the number of copies and to make

numerical entries for setting operations.

[C] key (clear key)

Press to clear a copy quantity entry. If this key is

pressed while the automatic document feeder is

being used, any originals in progress will be

automatically output.

[CA] key (clear all key)

Press to clear all selected settings and return the

machine to the initial settings for the currently

selected mode. Before starting a copy operation,

press the [CA] key first.

[ACC.#-C] key

If the auditing mode has been set, press this key to

close an open account after finishing a copy,

facsimile scanning or network scanning job. For

setting of the auditing mode, see page 6-7 of the

"Operation manual (for printer operation and general

information)".

[#/P] key (page 26)

Press to select the job memory mode.

[START] key (page 10)

When the indicator is lit, copying, facsimile scanning

and network scanning jobs can be started. Press to

start copying.