Sharp AR-M700U Manual técnico - Página 20

Procurar online ou descarregar pdf Manual técnico para Impressora tudo em um Sharp AR-M700U. Sharp AR-M700U 48 páginas.

Requirement:

• PC with Parallel (configured to ECP Mode), USB or Ethernet Port

• IEEE1284 Centronics or USB Type "A to B" or Ethernet cable

• "Dragon Update" Tool & Firmware

• Print Driver installed and configured to the preferred "upgrade method" Port (eg USB).

Note: The AR-P19 must be "enabled" to upgrade via Ethernet and both devices (PC &

Machine) must have Static IP addresses entered.

Procedure:

1. Power off the Machine

2. Remove the cover that exposes the MFP Pwb.

3. To prepare the machine to receive the updated firmware, set the MFP control Dip

Switches to "Write Mode" (across to the left):-

4. Connect a Parallel, USB or Ethernet cable from the machine to the appropriate PC

connector.

5. Start Windows (Power on the PC).

Using Windows Explorer, browse to the folder that contains both Firmware Data file

and "Dragon Update Up" tool.(Both the Dragon Update.exe and the firmware file should

be in the same location).

FIRMWARE UPGRADE

February 2005