Sharp DX-2500N Manual de configuração do software - Página 34

Procurar online ou descarregar pdf Manual de configuração do software para Impressora tudo em um Sharp DX-2500N. Sharp DX-2500N 43 páginas.

CHANGING THE PORT

Select [SC2 TCP/IP Port] and then click

the [New Port] button.

• The "SC2 TCP/IP Port" is added when the printer

driver is installed using a "Custom installation" with

"LPR Direct Print (Specify Address/Auto Search)"

selected.

• If the printer driver is installed using a "Custom

installation" with "IPP" selected, the [SC-Print2005

Port] is added. If you need to change the printer port

when the machine is connected to an intranet or a

wide area network (WAN) using the IPP function,

select [SC-Print2005 Port], click the [New Port]

button, and follow the on-screen instructions to

create the port again.

 Changing to a Standard TCP/IP Port

If the machine is being used on an IPv6 network, change the port to a port created using the operating system's

"Standard TCP/IP Port".

Follow steps 1 to 3 of "CHANGING THE

PORT" (page 31).

Create the new port.

(1) (2)

(1) Enter the machine's IP address.

☞

Checking the IP address of the machine

(page 7)

(2) Make sure that [LPR] is selected.

(3) Make sure that [lp] is entered.

(4) Click the [OK] button.

Click the [Close] button in the screen of

step 4.

Make sure the created printer port is

selected in the printer properties

window and then click the [Apply]

button.

Select [Standard TCP/IP Port] and then

click the [New Port] button.

(3)

(4)