Sharp MX-2640N Manual de início rápido - Página 11

Procurar online ou descarregar pdf Manual de início rápido para Impressora tudo em um Sharp MX-2640N. Sharp MX-2640N 28 páginas. Digital full color multifunctional system
Também para Sharp MX-2640N: Especificações (2 páginas), Manual rápido (2 páginas), Brochura e especificações (8 páginas), Manual de instalação (20 páginas), Manual rápido (2 páginas), Manual rápido (12 páginas)

Imprimir página
Sharp MX-2640N Manual de início rápido
Do not look directly at the light source.
Doing so may damage your eyes.
Do not block the ventilation ports on the machine. Do not install the machine in a location that
will block the ventilation ports.
Blocking the ventilation ports will cause heat to build up in the machine, creating a risk of fire.
The machine includes the document filing function, which stores document image data on the machine's hard drive. Stored documents can be called up and printed or transmitted as needed. If a hard drive failure occurs, it will no longer
be possible to call up the stored document data. To prevent the loss of important documents in the unlikely event of a hard drive failure, keep the originals of important documents or store the original data elsewhere.
With the exception of instances provided for by law, Sharp Corporation bears no responsibility for any damages or loss due to the loss of stored document data.
Laser information
Wave length
790 nm ± 10 nm
MX-2640N/MX-3140N:
Normal paper mode (P/S = 140 mm/s) = (3.86 µs ± 0.02 ns) / 7 mm
Heavy paper mode (P/S = 70 mm/s) = (3.86 µs ± 0.02 ns) / 7 mm
Pulse times
MX-3640N:
Normal paper mode (P/S = 165 mm/s) = (3.26 µs ± 0.04 ns) / 7 mm
Heavy paper mode (P/S = 82.5 mm/s) = (3.26 µs ± 0.04 ns) / 7 mm
Output power
Max 0.672 mW (LD1+LD2)
„ Caution
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
This Digital Equipment is CLASS 1 LASER PRODUCT (IEC 60825-1 Edition 2-2007)
CAUTION
The fusing unit and paper exit area are hot. When removing a
misfeed, do not touch the fusing unit and paper exit area. Take care
not to burn yourself.
When loading paper, removing a misfeed, performing
maintenance, closing the front and side covers, and
inserting and removing trays, take care that your fingers
are not pinched.
„ SAFETY PRECAUTIONS
This Digital Equipment is rated Class 1 and complies with 21 CFR 1040.10 and
1040.11 of the CDRH standards. This means that the equipment does not produce
hazardous laser radiation. For your safety, observe the precautions below.
• Do not remove the cabinet, operation panel or any other covers.
• The equipment's exterior covers contain several safety interlock switches. Do not
bypass any safety interlock by inserting wedges or other items into switch slots.
11