Digit Z DZ4-600 Manual - Página 2

Procurar online ou descarregar pdf Manual para Balanças Digit Z DZ4-600. Digit Z DZ4-600 2 páginas. Digital pocket scale

IV. Calibration / Adjustment

1. Press and hold the MODE key until the display

shows "CAL".

2. Press the MODE key again. The display will flash

"CAL" followed by the calibration weight value (see

chart).

3. Place the calibration weight on the center of the

weighing platform. Make sure you are using the

correct weight for your specific model.

4. Once the weight is accepted, the display will show

"PASS" then return to normal operation.

V. Error Codes

1. OUTZ - Zero range has shifted. Perform calibration

adjustment. If the problem persists, the load cell may

be permanently damaged due to overloading.

2. O-Ld - Maximum capacity exceeded. Remove the

extra weight to avoid damaging the load cell.

3. UnST - Unstable. Use in a more stable position.

Max. Capacity

Readability

Power

Dimensions

Platform Dimensions

Warranty

For warranty and support, please email

DZ4-600

600g

0.1g

Two (2) AAA Batteries

3.0 x 3.9 x 0.6 in.

1.9 x 3.5 in.

90 Day Limited Warranty