Sharp SJ-40J-GY Manual de serviço - Página 8
Procurar online ou descarregar pdf Manual de serviço para Frigorífico Sharp SJ-40J-GY. Sharp SJ-40J-GY 32 páginas.
Imprimir página
SJ-40J-GY/ BE
SJ-W40J-GY/ BE
SJ-36J-GY/ BE
SJ-W36J-GY/ BE
2. R & L DOOR / DUAL SWING DOOR
(1). Structure
Note
Do not destroy or damage the refrigerator body's
structure or internal structure intentionally.
Do not put any objects on the lower hinge or lower
hinge pin.
Please pay attention to the lower hinge pin and the
cam, do not let them get stuck.
Do not add oil to the refrigerator body, pulley, lower
hinge, since the plastic components will be
influenced by different kinds of oil.
Do not open the door of the refrigerator compartment
forcibly, the door may fall off or cause the personal
injury.
If the door can not be opened, please check the part
shown on the right figure to see if it is got stuck by
the foreign objects.
Door cam projection
Groove
Hinge projection
Door cam projection
1
The hinge pins on both right and left sides are supported with the projection
2
When the door is pulled, the hinge pin is guided to the groove
When the hinge pin is engaged with the "J shaped" groove
side, the door will be locked.
3
According to the opening degree of the door,
3
-1: Hinge pin and groove
3
-2: Hinge projection
3
-3: Hinge projection
3
-4: Hinge projection
Any one of the above guides keeps the stage in which the door is moved approx. 2 mm sideward.
4
When the door is closed, the procedure of
Even if the left and right doors are opened at the same time, both doors do not get off since the
width dimension between the projections
left and right hinge pins.
I
L
A'
D
Door cam projection
B'
b'
Hinge projection
a'
3 -3
3 -4
A'
C
b
and door cam projection
b'
on the opposite side and the projection
a'
on the opposite side and the projection
1
The explanation of the operation manual
R&L structure of the
refrigerator body
Cam
(hinge projection)
Lower hinge pin
Lower hinge
1
Door cam
2
3
B
Door cam projection
Hinge
projection
b
approx. 2mm
3
3
means the part of the main body side.
Figure F-5
C
and the door is moved approx. 2 mm sideward.
of the projection
D
B
A'
of the door cam
A'
of the door cam
3
thru
is reversed.
A
and
A'
of the door cam is small than that between the
8
R&L structure of
the door
(Positioned at the
four corners of the door)
Pulley
Figure F-3
Figure F-4
Hinge pin
Door cam projection
A
Groove
2
C
3
-1
3 -2
a
Hinge projection
A A'
of the door cam.
A'
of the door cam on the opposite