AccuTherm US-5461P-ACCU1 Manual de instruções - Página 14
Procurar online ou descarregar pdf Manual de instruções para Controlador AccuTherm US-5461P-ACCU1. AccuTherm US-5461P-ACCU1 18 páginas. Temperature and humidity controller
Imprimir página
7.2 Program edit
Edit the program which is set before
7.3 Time signal setting
There are ten terms (0-9) in "Time signal time set" screen. NO.0 represent OFF；and NO.1 represent ON，
NO.0 and NO.1 cannot be altered；NO.2-NO.9 can be set according to requirement. Explaination as below:
ON DELAY：time signal act after segment counting started and（ON DELAY TIME）period passed。
E.g.：Time Signal Model NO.2 with ON DELAY＝1hour, if program time setting is 2 hours, and you choose
time signal mode no.2 in this segment.
The result of procedure：after program started, 1 hour before signal as OFF，1hour later as ON。
CUT ON/OFF：use CUTmode or not（CUT TIME setting enable after using Cut mode ） 。
E.g.：Time Signal Model NO.2 with ON DELAY＝1hour and CUT TIME＝30min，if program time setting is
2 hours, and you choose time signal mode no.2 in this segment
The result of procedure：after program started, 1hour before as OFF，in the midst of 30mins as ON，
the last 30mins as OFF。
"Time Signal" setting is show as below
14