Sharp SJG2351FS Manual de operação e instruções de instalação - Página 16
Procurar online ou descarregar pdf Manual de operação e instruções de instalação para Frigorífico Sharp SJG2351FS. Sharp SJG2351FS 20 páginas.
![Sharp SJG2351FS Manual de operação e instruções de instalação](/uploads/products/server2/5055123/5055123.jpg)
CARE AND CLEANING
OVERALL CLEANING
• Dusts behind the refrigerator and on the ground shall be
timely cleaned to improve the cooling effect and energy
saving. The interior of the refrigerator should be cleaned
regularly to avoid odor. Soft towels or sponge dipped in
water and non-corrosive neutral detergents are suggested
for cleaning. The freezer shall be finally cleaned with clean
water and dry cloth. Open the door for natural drying before
the power is turned on.
• Do not use hard brushes, clean steel balls, wire brushes,
abrasives, such as toothpastes, organic solvents (such as
alcohol, acetone, banana oil, etc.), boiling water, acid or
alkaline items clean refrigerator considering that this may
damage the fridge surface and interior.
• Do not rinse with water so as not to affect the electrical
insulation properties.
DANGER
Please unplug the refrigerator for defrost and cleaning.
CLEANING OF DOOR TRAY
Figure 10
• According to the direction arrow in the figure below, use both
hands to squeeze the tray, and push it upward, then you can
take it out. See Figure 10.
• After washing the tray having been taken out, you can adjust
its installing height in accordance with your requirement.
CLEANING OF SHELF
Lower end
of fixed leg
Upper end
of fixed leg
Figure 11
3
2
1
Slot
Please dismantle the cantilever shelf according to the arrows as
shown in the illustration. See Figure 11.
1. Hold the front edge of shelf, and tilt the shelf inwards until
the lower end of fixed leg is separated from the slot of
supporting iron.
2. Uplift the whole shelf until it can not rise anymore;
3. Take out the shelf horizontally.
During installation, put the upper end of the fixed leg into one
of the upper slots on the supporting iron first and then put the
lower end of the fixed leg into the third slot on the lower part
of the supporting iron.
DEFROSTING
The refrigerator is made based on the air-cooling principle and
thus has automatic defrosting function. Frost formed due to
change of season or temperature may also be manually removed
by disconnection of the appliance from power supply or by
wiping with a dry towel.
OUT OF OPERATION
• Power failure: In case of power failure, even if it is in
summer, foods inside the appliance can be kept for several
hours; during the power failure, the times of door opening
shall be reduced, and no more fresh food shall be put into
the appliance.
• Long-time nonuse: The appliance shall be unplugged and
then cleaned; then the doors are left open to prevent odor.
• Moving: Before the refrigerator is moved, take all objects
inside out, fix the glass partitions, vegetable holder, freezing
chamber drawers and etc. with tape, and tighten the levelling
feet; close the doors and fix them with tape. During moving,
the appliance shall not be laid upside down or horizontally,
or be vibrated; the inclination during movement shall be no
more than 45˚.
DANGER
The appliance shall run continuously once it is started.
Generally, the operation of the appliance shall not be
interrupted; otherwise the service life may be impaired.
CHANGING THE LIGHT
Any replacement or maintenance of the LED lamps is intended
to be made by the manufacturer, its service agent or similar
qualified person.
16