Sharp SJM60MK Manual de operação - Página 4
Procurar online ou descarregar pdf Manual de operação para Frigorífico Sharp SJM60MK. Sharp SJM60MK 11 páginas.
Imprimir página
2. Installation
Ventilation
Ensure adequate ventilation all around the refrigerator. Good dissipation of
heat is necessary for the refrigerator to work efficiently and minimise power
consumption.
Provide sufficient clearance space around the refrigerator, a
minimum of 100mm at the back, a minimum of 200mm for the sides and a
minimum of 300mm at the top.
Provide a clear space in front to enable the door to fully open to 160°.
Power Supply
The refrigerator operates on a power supply of a single-phase alternating
current (See rating label).
In areas where fluctuating power may cause voltage to exceed safe levels,
use an A.C. automatic voltage regulator. The refrigerator must have its own
power socket; do not share with other electrical appliances. Ensure the
plug is grounded.
Power / Electrical Cord
Do not lengthen or coil the power cord when the refrigerator is in use. Do not
place the cord close to the compressor at the back of the refrigerator. The heat
generated from the compressor can damage the cord's insulation and cause a
short circuit. Use of an extension cord is not recommended.
Position the refrigerator so that the plug is easily accessible.
Protecting from Moisture
Do not install the refrigerator in a damp or wet location that may cause rusting
of metal parts. Do not spray water in or onto the refrigerator as this may lead to
rusting and deterioration of electrical insulation.
Protecting from Heat
Keep the refrigerator out of direct sunlight and away from all heat sources and
heat-generating appliances.
Stability
Ensure the floor on which the refrigerator sits is flat and stable. Do not place the
refrigerator on any soft material such as plastic foam, etc. Adjust the two front
levelling feet to ensure the refrigerator is level on the floor. Do not place refrigerator
near items that will vibrate when the refrigerator is in operation.