Digital Acoustics IP7-SS20 Manual de iniciação
Procurar online ou descarregar pdf Manual de iniciação para Amplificador Digital Acoustics IP7-SS20. Digital Acoustics IP7-SS20 4 páginas. Ip paging amplifier
Também para Digital Acoustics IP7-SS20: Manual de referência (20 páginas)
Imprimir páginaIP7-SS20
Getting Started Guide
Introduction
The IP7-SS20 IP paging endpoint enables 1-way IP audio to analog
speakers from TalkMaster™ software and/or VoIP Systems supporting
industry standard SIP 2.0 (VoIP) protocols. The internal amplifier can deliver
20 watts of audio power to one or more speakers. Power must be supplied
by external 24-32V AC or DC power supply.
The SS20 is configured using TalkMaster Admin Console. This Getting
Started booklet covers basic hardware installation and software configuration
of the IP7-SS20.
Please refer to the IP7-SS20 Reference Manual available on the Software
i
Installation CD for additional information on installation and setup
Important Installation Guidelines
• Choose 12-18 AWG wire for speaker connections. Select wire gauge
suited to minimize power loss for specific distribution method and wire run
distances
• Do not install near power distribution equipment or noise generating
equipment such as stepper motors
• Conform to industry standard practices for grounding
• Avoid sharing AC power and audio signals in conduit runs
Page 1 of 4
IP7-SS20 Installation