Sharp PG-M20 Series Folha de referência de início rápido

Procurar online ou descarregar pdf Folha de referência de início rápido para Projetor Sharp PG-M20 Series. Sharp PG-M20 Series 5 páginas.

Imprimir página

NOTE: This one-page document is intended only as a quick reference for installation – please read

the SP Controls Application Note for a complete description of this projector driver prior to installation.

I. Driver Features

1. Input Selection Mapping

Selection 1:

DVI

Selection 2:

S-VIDEO

Selection 3:

VIDEO

Selection 4:

VIDEO

2. Hidden Function Mapping (Default Configuration)

Using the ON button as a shift key, press the following buttons to access the specified projector features.

Selection 1:

ENTER

Selection 2:

UNDO

Selection 3:

ADJ LEFT

Selection 4:

ADJ RIGHT

Off:

Volume Up:

ADJ UP

Volume Down:

ADJ DOWN

3. Other Driver Features

Power Status Feedback Method

Control Wiring:

II. Wiring Specifications

NOTE: For a wiring diagram, please see the SP Controls Application Note.

1. Infrared Emitter:

Wire the Panel IR/Serial port to a female 1/8" Mini as follows:

IR/SER to

tip

GND to

ring

Connect to the included IR Emitter and attach the emitter bud to any projector IR window.

III. Additional Projector Information

There are settings on the Sharp PG-M20x projector that will affect how the SmartPanel will work. In order

to receive the best performance, set the following options to OFF in the projectors menu screens.

Press the MENU button either using the SmartPanel hidden functions or the Sharp remote control. Then

change the following settings.

1. In the Options menu screen turn Auto Power Off to OFF

2. In the Options menu screen turn the Power Save to OFF

3. In the Options menu screen turn the Auto Search to OFF

DR-SHP20 – 9/17/03

Sensor

IR-Emitter

SP Controls reserves the right to modify specifications without notice at any time.

Quick Start Reference Sheet

Sharp PG-M20x

Revision A