Digital Acoustics IP7-ST Manual de iniciação - Página 3
Procurar online ou descarregar pdf Manual de iniciação para Sistemas de controlo Digital Acoustics IP7-ST. Digital Acoustics IP7-ST 4 páginas.
Imprimir páginaTalkMaster
TalkMaster™ Server Software is a suite of Windows® based applications
used to configure and manage Digital Acoustics IP7™ and ii3™ Intercoms
and Paging endpoints. Applications included with the TalkMaster Server are
the Admin Console for configuration of the Server and IP Endpoints and the
Operator Console for managing 2-way Intercom calls and 1-way Paging
announcements.
Please refer to the TalkMaster Admin Console Reference Manual on the
i
Software Installation CD for additional information and software setup
• Install the TalkMaster software using the Software Installation CD
• Refer to the previous section to power up and connect the IP7 series
device to the network.
• Record the unique ID# from the bottom label of the IP Endpoint and note
the location where it will be installed
• Start the Admin Console and logon with an
Operator ID of admin and the default password
of admin
• Click the Settings → Endpoint
Defaults tab and make any
changes required for your
installation. For instance, if you
want to assign static IP
Addresses, uncheck the Assign
Automatically with DHCP
checkbox
•
Click the IP Endpoints tab and press the FIND ALL button in the lower
right hand corner of the screen. Newly discovered IP Endpoints appear in
the list
™
Software
options
• Click on the IP Endpoint to be configured (the "Icom ID" column must
match to the Intercom's previously recorded ID#)
• Click the Defaults button to fill in default
values from the Endpoint Defaults tab
• Enter a descriptive name into the
Location Name field
• Make any other desired changes, then
select the Options 1 tab
Optional configuration options include:
Options 1 tab
Relay Options
• Door Open - adds an ICON to the Operator Console so the Operator
can activate the Relay for an electronic door strike
• PTT - Activates the Relay when the 'Talk' switch (J2-5) is grounded
• Activate on Speaker and/or Mic - activates the Relay when either MIC
and/or Speaker is active
Sensor Options - Used in conjunction with Door Open Relay. Changes the
color of the ICON in the Operator Console when the door is open
• Active when Closed to Ground - when J3-5 is closed to ground
• Activate when Open to Ground - when J3-5 is open to ground
Page 3 of 4