Digital Alert Systems R198 Manual de instruções - Página 12

Procurar online ou descarregar pdf Manual de instruções para Interruptor Digital Alert Systems R198. Digital Alert Systems R198 13 páginas. 4 unit aes switch

Imprimir página

Changing the Network settings – Enter the new network settings as desired. When you

have reviewed your settings and want to keep them ,click on "Submit". These new changes

will show up in the Network tab, but will not take affect until the power is removed and reap-

plied to the unit.

Permanent storage of IP change – To store the new Network settings into memory,

remove the power from the unit, wait approximately 10 seconds, and reconnect the

power to the unit.

Note: To set the unit back to the default Network settings, remove the power from the

unit. Using a small probe, press and hold the Reset button on the back panel on the unit

while reconnecting the power to the unit. Keep the button depressed for 10 seconds

after re-applying power, then release the Reset button .The unit will be reset to the

default IP address of 192.168.1.2.