Shimano DI2 Adapter B Manual do utilizador
Procurar online ou descarregar pdf Manual do utilizador para Carregador de bateria Shimano DI2 Adapter B. Shimano DI2 Adapter B 2 páginas. Rear derailleur
Também para Shimano DI2 Adapter B: Manual do Concessionário (19 páginas)
Imprimir página
UM-5XW0C-000
Rear Derailleur (Di2)
IMPORTANT NOTICE
• Contact the place of purchase or a distributor for information on installation,
adjustment, and replacement of the products which are not found in the user's
manual. A dealer's manual for professional and experienced bicycle mechanics is
available on our website (https://si.shimano.com).
For safety, be sure to read this "user's manual" thoroughly
before use, follow it for correct use, and store it so that it
can be referenced at any time.
The following instructions must be observed at all times in order to prevent
personal injury and physical damage to equipment and surroundings. The
instructions are classified according to the degree of danger or damage which may
occur if the product is used incorrectly.
Failure to follow the instructions will result in
DANGER
death or serious injury.
Failure to follow the instructions could result in
WARNING
death or serious injury.
Failure to follow the instructions could cause
CAUTION
personal injury or physical damage to equipment
and surroundings.
Important safety information
WARNING
• Do not disassemble or modify the product. This may cause the product to not
operate correctly, and you may suddenly fall and be seriously injured.
• Never use alkali based or acid based solvents such as rust cleaners. If
those solvents are used the chain might break and cause serious injury.
• Clean the chain with an appropriate chain cleaner regularly. Intervals
between maintenance depend on the use and riding circumstances.
• Check the chain for any damage (deformation or cracking), skipping, or other
abnormalities such as unintended gear shifting. If any problems are found,
consult your place of purchase or a distributor. The chain may break, and you may
fall.
Notice
• Be sure to check that the plate unit cover and cap are installed before riding the
bicycle.
* For MTB
• Be careful not to get water into the E-TUBE ports.
• The components are designed to be fully waterproofed to withstand wet weather
riding conditions; however, do not deliberately place them into water.
• Do not clean the bicycle with a high-pressure washer. If water gets into any of the
components, operating problems or rusting may result.
• Handle the components carefully, and avoid subjecting them to strong shock.
User's Manual
• Do not use the thinners or harsh solvents to clean the products. Such solvents may
damage the surface. When cleaning the products, use a cloth moistened with a
neutral detergent diluted with water.
• If gear shifting operations do not feel smooth, wash the shifting unit and
lubricate all moving parts.
• If the chain keeps skipping, replace the gears and chain at the place of purchase.
• If you hear abnormal noise as a result of excess play in a pulley while riding, you
should replace the pulley at the place of purchase.
• The gears should be periodically washed with a neutral detergent. In addition,
cleaning the chain with neutral detergent and lubricating it can be an effective
way of extending the life of the gears and the chain.
• Contact the place of purchase for updates of the component software. The most
up-to-date information is available on the SHIMANO website.
• Products are not guaranteed against natural wear and deterioration from normal
use and aging.
• For maximum performance we highly recommend SHIMANO lubricants and
maintenance products.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired
operation.
Regular inspections before riding the bicycle
Before riding the bicycle, check the following items. If any problems are found,
consult your place of purchase or a distributor.
• Is gear shifting carried out smoothly?
• Has excess play increased in the links?
• Has excess play increased in the pulleys?
• Are there any abnormal noises coming from the derailleur?
• Has the chain become elongated?
• Is there any noticeable damage on the chain?
• Is the plug cover installed in the correct position?
* For MTB
Names of parts
For ROAD
E-TUBE port
Link
For MTB
E-TUBE port
Plug cover
Link
Pulley
How to operate
When removing the rear wheel, be sure to first move the lever switch to the OFF
position.
* The shape and position of the lever switch differ depending on the model.
ON
OFF
Lever switch
Pulley
Lever switch
Plate unit cover
Cap