Actron A23909 Instruções de montagem - Página 3

Procurar online ou descarregar pdf Instruções de montagem para Equipamento de teste Actron A23909. Actron A23909 5 páginas. Latch assy - double paddle, double bolt

Imprimir página

REV

DATE

A23909

OMEGA SERIES

CORONA, CALIFORNIA

NC 9/21/12

ASSEMBLY

INSTRUCTIONS

STEP 3

GLUE RUBBER BUMPER INTO HANDLE CAVITY AS SHOWN.

REPEAT FOR OPPOSITE HANDLE.

STEP 4

PLACE BOTH HANDLE ASSEMBLIES IN SLOTS OF

GUIDE BOLT. COMPRESS TORSION SPRINGS AND PLACE

IN CORRECT SLOTS INSIDE HANDLES.

ALIGN HOLES IN HANDLES AND GUIDE.

INSERT PIN THROUGH BOTH HANDLES, TORSION SPRINGS,

AND GUIDE. STAKE BOTH ENDS OF PIN SO IT CANNOT FALL OUT.

BE SURE TO PLACE APPROPRIATE TORSION

SPRING LEG INTO RECESS IN GUIDE BOLT.

STEP 5

PLACE SMOOTH CAM AND ROLLER IN APPRORIATE

BOLT SLOT AS SHOWN. INSERT ROLL PIN THRU HOLE

IN BOLT AND SLOT IN SMOOTH CAM. INSERT GROOVE

PIN INTO HOLE IN BOLT AND THRU HOLE IN ROLLER. MAKE

SURE PINS ARE FLUSH OR BELOW SURFACE OF BOLT ON

BOTH SIDES.

SHEET 3 OF 5