Crestron IRP2 Manual de instalação - Página 2

Procurar online ou descarregar pdf Manual de instalação para Sistemas de controlo Crestron IRP2. Crestron IRP2 2 páginas. Ir emitter probe
Também para Crestron IRP2: Manual de instalação (12 páginas), Manual de instalação (2 páginas)

Imprimir página

Hardware Hookup

Insert the IRP2's 2-pin connector into an infrared-serial output port of a control system

or a room solution box as shown in the following illustration.

IRP2 Connection Diagram

Crestron DM-RMC-200-C

Optical Disk Player

NOTE: The white-traced wire is positive (+) and connects to the pin labeled "S."

As of the date of manufacture, the device has been tested and found to comply with

speci cations for CE marking.

Product warranty can be found at www.crestron.com/warranty.

The speci c patents that cover Crestron products are listed at patents.crestron.com.

Certain Crestron products contain open source software. For speci c information, please visit

www.crestron.com/opensource.

Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron

Electronics, Inc. in the United States and/or other countries. Other trademarks, registered

trademarks, and trade names may be used in this document to refer to either the entities claiming

the marks and names or their products. Crestron disclaims any proprietary interest in the marks

and names of others. Crestron is not responsible for errors in typography or photography.

This document was written by the Technical Publications department at Crestron.

Crestron Electronics, Inc.

15 Volvo Drive, Rockleigh, NJ 07647

Tel: 888.CRESTRON

Fax: 201.767.7576

www.crestron.com

IR sensor

window

IR port

(S G S G)

2-pin connector

Installation Guide - DOC. 8186D

(2002188)

12.16

Specifications subject to

change without notice.