Accutone ASP2200 Manual do utilizador - Página 5

Procurar online ou descarregar pdf Manual do utilizador para Amplificador Accutone ASP2200. Accutone ASP2200 5 páginas. Telephone amplifier

5) TROUBLESHOOTING THE ACCUTONE ASP2200 AMPLIFIER

Q, There is no response from the unit.

Q, I cannot hear any dial tone or my caller speaking to me when using the headset supplied.

A, Check if the batteries are low, replace if required, check to see if the batteries are correctly inserted or make sure the on/off switch is

switched to ON.

Q, My Caller cannot hear me at all or cannot hear me very well.

A, Check the Headset/Handset and Telephone/Computer switches are properly selected.

A, Check to see if the telephone patch cable is properly connected.

A, Check the volume control and mute button are adjusted properly.

Q, I hear my voice too loud and there is a squealing sound.

A, Check if the Configuration Switch position is properly selected.

Q, When using with my computer, the sound is too loud even though the volume is set at minimum.

A, Your computers sound card also has a volume setting which may need altering.

6.) SPECIFICATIONS

Standard Operating Voltage

Operating Current (Max)

Standby Current

Standby Mode Activation

Amplifier Gain

- Speaker

- Microphone

Battery

Adapter DC Input

(Adapter not included)

7) INFORMATION!

For your safety we advise that you keep this headset and its components away from any liquids. Do not attempt to effect repairs yourself;

seek qualified advice. Always operate at a safe volume level to protect your hearing. Take regular breaks when using telephone headsets.

Product Support Line

If, after following these instructions and carefully checking the settings, you require assistance please call 0871 200 2276 between 9.00am

and 5.30pm Monday to Friday (except public holidays). Calls are charged at national rate

A copy of the Declaration of Conformity for this product can be found at www.easidirect.co.uk

Please Follow the Instructions in This Manual to Ensure Successful Operation of Your Headset.

3V DC

600 mA

(without signal)

13 dB (Max)

2 x size "AA"

6V~9V DC

17 mA

2~3 min.

30 dB (Max)

Helpline 0871 200 2276