Crestron AirMedia AM-TX3-100 Manual - Página 4
Procurar online ou descarregar pdf Manual para Recetor Crestron AirMedia AM-TX3-100. Crestron AirMedia AM-TX3-100 5 páginas. Connect adaptor
Imprimir página
Release History
1.0.1.114
Item
File name
New Features
•
N/A
Fixed Issues
•
Resolves an issue where static noise could be heard for 10-15 seconds at the start of a presentation
when connected to a MacBook.
Known Issues
•
The Connect Adaptor generally takes about 6-15 seconds to connect and begin presenting, this will
vary based on environment. After unplugging the Connect Adaptor, it takes about 7 seconds for the
presentation to be removed from the Front of Room display.
•
When using a MacBook with an M2 chip, audio drops and popping sounds can be heard periodically.
•
When presenting from an iPad or MacBook, volume controls are not available on the user's device.
•
When running a long duration presentation from an AM-TX3-100(-I), the image may freeze on the
display, or the session may drop. Reconnect the AM-TX3-100(-I) to recover and resume presenting.
•
If an AM-TX3-100(-I) is left presenting from a laptop for a long duration, stopping and restarting the
presentation may lead to the device disconnecting. Reboot the AirMedia receiver to recover.
•
In certain scenarios, after running several long duration AM-TX3-100(-I) presentations, subsequent
connection attempts will be unsuccessful. Reboot the AirMedia receiver to recover.
•
Occasionally the AM-TX3-100(-I) will not automatically come back online and resume presenting
after a firmware update. Reconnect the AM-TX3-100(-I) to recover and perform the update again if it
was not successful.
•
When connected to a MacBook and the audio output is switched between the built in speaker and
the AM-TX3-100(-I).
1.0.1.112
Item
File name
New Features
•
Initial release of the AirMedia Connect Adaptor (AM-TX3-100 / AM-TX3-100-I) with support for
wireless presentation.
Fixed Issues
•
N/A
Date: 2023-05-11
Value
am-tx3-100_1.0.1.114.bin
Date: 2023-04-21
Value
am-tx3-100_1.0.1.112.bin