Digital Electronics Corporation APL3700-TD Manual de instalação - Página 12

Procurar online ou descarregar pdf Manual de instalação para PC industrial Digital Electronics Corporation APL3700-TD. Digital Electronics Corporation APL3700-TD 17 páginas.

Imprimir página

(4) Slide the control box in direction shown

by the arrow.

Use the bridge

position as a guide.

(5) Lift the control box and remove the front

module tabs from the slot on the

installation fasteners for the control box.

Then remove the control box.

Installing the front module and the

control box

Install the control box to the front module in

the reverse order of the uninstallation steps.

The necessary torque is 0.5N•m to 0.6N•m in

every step.

Wiring

• To avoid an electric shock, prior to con-

necting the PL unit's power cord terminals

to the power terminal block, confirm that

the PL unit's power supply is completely

turned OFF, via a breaker, or similar unit.

• Any other power level can damage

both the PL and the power supply.

• Since DC type has no power ON/OFF

switch, be sure to attach a breaker-

type switch to its power cord.

• When the FG terminal is connected, be

sure the wire is grounded.

Wiring the AC type power supply cable

• When the FG terminal is connected, be

sure the wire is grounded. Not

grounding the PL unit will result in

excessive noise. Use your country's

applicable standard for grounding.

Power Cord Specifications

Use copper conductors only.

Power Cord

Diameter

Conductor Type Simple or Stranded Wire

Conductor

Length

*1 If the Conductor's end (individual) wires are not

twisted correctly, the end wires may either short

against each other, or against an electrode.

Wiring

When connecting the power code, use the

following items when performing wiring.

(Items are made by Phoenix Contact.)

Recommended

Driver

Recommended

Pin Terminals

Recommended

Pin Terminal

Crimp Tool

0.75 to 2.5mm

(18 - 12 AWG)

10mm [0.39in]

SZS 0.6x3.5 (1205053)

AI 0.75-10GY(3201288)

AI 1-10RD (3200182)

AI 1.5-10BK (3200195)

AI 2.5-12BU (3200962)

CRIMPFOX ZA3

(1201882)