Digital Equipment PrintServer 32 Manual do operador - Página 15

Procurar online ou descarregar pdf Manual do operador para Impressora Digital Equipment PrintServer 32. Digital Equipment PrintServer 32 20 páginas. Controller firmware version 3.6 upgrade
Também para Digital Equipment PrintServer 32: Manual (6 páginas)

Imprimir página

1.4 Troubleshooting

If the paper selection knob and the paper adjustment levers are not set to

the paper size loaded in the OLCIT, paper jams will occur.

Table 1–2 shows the LEDs and what to do to correct the situations listed.

Table 1–2 OLCIT LEDs

This LED . . .

Paper Mis-set

Cover Open

Elevator Push

Button

Table 1–3 shows the print errors that might occur and what to do to correct

them.

Table 1–3 Print Errors

Print Error

Paper Jam

If you cannot correct the problem or the operator panel instructs you to call

Customer Services, the OLCIT requires servicing by a qualiﬁed Customer

Services engineer.

Digital has a service center in your area to help keep your system running

properly.

Where

North America

All Other

Locations

Using the Optional Large Capacity Input Tray

Note

Lights When . . .

The paper size selection knob

is between detented settings.

OLCIT cover is open.

Elevator is moving.

Corrective Action

Clear the jam. See the PrintServer 32 Printer

Operator's Guide for instructions on clearing paper

jams inside the PrintServer. See Section 1.3 of this

guide for clearing paper jams in the OLCIT, then see

the Corrective Action section of Table 1–2 in this guide

for instructions.

Type of Service

On-site warranty

Using the Optional Large Capacity Input Tray 1–11

1.4 Troubleshooting

And you need to . . .

Position the paper size selection

knob correctly.

Make sure the OLCIT cover is

closed.

None

Telephone Number

1–800–354–9000

Call your local sales ofﬁce