Siemens 3TA4NG500PT Manual

Procurar online ou descarregar pdf Manual para Equipamento industrial Siemens 3TA4NG500PT. Siemens 3TA4NG500PT 6 páginas. Control wire terminal

Imprimir página

Control Wire Terminal

Terminal de cable de control

Terminal de fil de contrôle

Installation Instructions / Instructivo de Instalación

Hazardous Voltage.

Will cause death or serious injury.

Turn off and lock out all power supplying this device before

working on this device.

Replace all covers before power supplying this device is

turned on.

Use only with Siemens certified Components.

Utilizar únicamente con componentes certificados de Siemens.

A utiliser uniquement avec les composants certifiés Siemens.

NOTE - These instructions do not purport to cover all

details or variations in equipment, or to provide for every

possible contingency to be met in connection with

installation, operation or maintenance. Should further

information be desired or should particular problems

arise, which are not covered sufficiently for the

purchaser's purposes, the matter should be referred to

the local Siemens sales office. The contents of this

instruction manual shall not become part of or modify

any prior or existing agreement, commitment or

relationship. The sales contract contains the entire

obligation of Siemens. The warranty contained in the

contract between the parties is the sole warranty of

Siemens. Any statements contained herein do not

create new warranties or modify the existing warranty.

Trademarks - Unless otherwise noted, all names

identified by ® are registered trademarks of Siemens AG

or Siemens Industry, Inc. The remaining trademarks in

this publication may be trademarks whose use by third

parties for their own purposes could violate the rights of

the owner.

8 0 6 9 2 2 A 0 1

Tensión peligrosa.

Puede causar la muerte o lesiones graves.

Desenergice totalmente antes de instalar o darle servicio.

Reemplace todas las barreras y cubiertas antes de

energizar el interruptor.

1 / 6

U.S. Cat. No.

Item: TA3MG500PT

3TA4NG500PT

For Use With Frame MG, NG

Para Usar Con Caja Base MG, NG

Tension dangereuse.

Danger de mort ou risque de blessures graves.

Couper l'alimentation de l'appareil et barrer avant de

travailler.

Remplacez touts les couverts avant que

l'approvisionnement de pouvoir soit alimenté.

Cal. ISO 6789

5/16 -18 x 1.25"

5/16"

MG (Cu / Al)

TA3MG500PT / 3VL9650-4TG03

NG (Cu / Al)

3TA4NG500PT / 3VL9750-4TH33

Euro Order No.

3VL9650-4TG03

3VL9750-4TH33

1/4"

5/16"

8mm

4-40

2 X 4-40

5/16 -18 x 3.0"

5/16"

I.L. No.

806922A01