Siemens SIMATIC ET 200AL Manual - Página 24

Procurar online ou descarregar pdf Manual para Equipamento industrial Siemens SIMATIC ET 200AL. Siemens SIMATIC ET 200AL 26 páginas. 10-link digital output module dq 8x24vdc/2a 8xm12
Também para Siemens SIMATIC ET 200AL: Manual (38 páginas), Manual (50 páginas), Manual (38 páginas), Manual (32 páginas), Manual (37 páginas), Manual do equipamento (46 páginas), Manual do equipamento (28 páginas), Manual do equipamento (27 páginas), Manual (25 páginas)

Imprimir página
Siemens SIMATIC ET 200AL Manual
Article number
Switching frequency
•
•
•
Total current of the outputs
•
Cable length
•
Encoder
Connectable encoders
•
IO-Link
IO-Link protocol 1.1
Transmission rate
Cycle time, min.
Size of process data, input per module
Size of process data, output per module
Supported IO-Link profiles
Cable length unshielded, max.
Connection of IO-Link devices
•
Interrupts/diagnostics/status information
Substitute values connectable
Alarms
•
Diagnoses
•
Diagnostics indication LED
•
•
•
Potential separation
between the load voltages
Potential separation channels
•
•
IO-Link digital input/digital output module DIQ 16x24VDC/0,5A 8xM12 (6ES7143-5AH00-0BL0)
Equipment Manual, 08/2021, A5E47926885-AB
with resistive load, max.
with inductive load, max.
on lamp load, max.
Current per module, max.
unshielded, max.
2-wire sensor
–
permissible quiescent current (2-wire sen-
sor), max.
Port type B
Diagnostic alarm
Short-circuit
Channel status display
for module diagnostics
For load voltage monitoring
between the channels
between the channels and the power supply
of the electronics
Technical specifications
6ES7143-5AH00-0BL0
100 Hz
0.5 Hz
1 Hz
4 A
30 m
Yes
1.5 mA
Yes
38.4 kBd (COM2)
3 ms
2 byte
2 byte
common profile
20 m
Yes
Yes; channel by channel, parameterizable
Yes; Parameterizable
Yes; outputs to ground; encoder supply to
ground; module by module
Yes; green LED
Yes; green/red LED
Yes; green LED
Yes
No
Yes
23