Siemens simatic ET 200MP Manual - Página 13

Procurar online ou descarregar pdf Manual para Equipamento industrial Siemens simatic ET 200MP. Siemens simatic ET 200MP 29 páginas. Digital output module dq 16x230vac/2a st relais (6es7522-5hh00-0ab0)
Também para Siemens simatic ET 200MP: Manual (40 páginas), Manual (24 páginas), Manual (29 páginas), Manual (47 páginas), Manual (26 páginas), Manual (28 páginas), Manual (50 páginas), Manual (34 páginas), Manual do utilizador (44 páginas), Manual (30 páginas), Manual (25 páginas), Manual (42 páginas), Manual (28 páginas), Manual (33 páginas), Manual (49 páginas), Manual (36 páginas), Manual (39 páginas), Manual (28 páginas), Manual do equipamento (35 páginas), Manual do equipamento (32 páginas), Manual (34 páginas), Manual (36 páginas), Manual do equipamento (50 páginas), Manual (45 páginas)

Imprimir página

Mounting

Mounting the mounting rail

Note

No screws behind the active backplane bus

Note that behind the active backplane bus, no screws are available for mounting the

mounting rail. Otherwise, the active backplane bus cannot be mounted.

System power supply

With active backplane bus, a system power supply supplies power to the entire station. Which

means also to the I/O modules plugged in to the left of the bus. You can plug the system

power supply into any slot to the right of the interface module.

Note

System power supply

You must not plug any system power supply to the left of the interface module.

Place the active backplane bus in the mounting rail and mount the modules

Below we will show you how to mount the active backplane bus.

1. Tilt the active backplane bus forward and insert it diagonally into the mounting rail.

2. Push the active backplane bus backwards.

Figure 3-1

Insert the active backplane bus into the mounting rail

Active backplane bus ST 1+12 slot, active backplane bus ST 1+8 slot, active backplane bus ST 1+4 slot

Equipment Manual, 07/2020, A5E46240468-AB